







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Fort Worth Homeowners
Fort Worth sits on expansive clay soil that swells after every rain and shrinks through July, and that movement is the reason so many fences around here lean, heave, or fail at the post line years before the panels do. Our technicians have up to 19 years of experience setting posts to depth, tying into the right concrete, and picking materials that hold up to North Texas heat, hail, and the occasional hard freeze. Every job comes with a flat written price before anyone digs a hole, a documented photo record of the work, and a 365-Day Done Right Promise. Call (833) 570-6084 for a free estimate on your fence installation in Fort Worth.
What Our Fence Installation Service Includes
Fence work is one of our seven trades, and it gets the same discipline as a kitchen or a roof: written scope, written price, signed change orders before anything shifts. Here is what each type of fence job covers.
Wood Fence
A wood fence is cedar or pressure-treated pine pickets and rails on set posts, and it remains the most common privacy fence in Fort Worth because it is repairable board by board. You need it when an existing wood run has rotted at the base or the pickets have cupped from sun, and we specify the lumber grade and post spacing in the written quote so you know exactly what grade of cedar you are paying for. We set posts below the clay’s active layer and brace every gate with a diagonal, because gates are where a wood fence fails first.

Chain Link Fence
Chain link is galvanized or vinyl-coated steel mesh stretched on pipe, and it is the practical choice for side yards, pet containment, and rental property perimeters where privacy is not the point. You need it when you want enclosure at the lowest cost per linear foot and can live without a solid sight line. We size the pipe gauge and the mesh gauge to the job rather than defaulting to the thinnest kit, and we tension the fabric so it does not sag six months in.

Vinyl Fence
Vinyl is extruded PVC in privacy panel or picket profiles, and a vinyl fence installation in Fort Worth typically runs $3,500 – $9,000 for a standard residential run. It needs no staining or sealing, which suits homeowners who want the look without the annual maintenance, and heavy-gauge profiles with reinforced rails hold their lines through Texas heat better than the thin box-store panels. We confirm the rail reinforcement and the post anchoring method in writing before we quote.

Aluminum Fence
Aluminum is powder-coated metal in ornamental or flat-top styles, and an aluminum fence installation in Fort Worth runs $4,000 – $10,000 depending on height, spacing, and the number of gates. It is the right call for pool enclosures, front-yard definition, and anywhere you want a boundary that does not block the view. We specify the wall thickness on the quote, because aluminum panels that look identical in a photo differ a great deal when you push on them.
Iron Fence
Wrought and ornamental iron is heavier and denser than aluminum and is chosen for the weight and the traditional profile. You need it when security and permanence matter more than budget, and we plan the rust protection at the weld points and the finish coat as part of the scope. Iron work demands a heavier concrete footing, so we size the footings to the panel load rather than reusing an aluminum spec.
Fence Repair
Fence repair covers post replacement, rail and picket swaps, gate re-hang, and resetting leaning sections, and it is often the honest answer when three or four panels have failed on a run that is otherwise sound. We photograph the failed sections and tell you plainly whether a repair will hold or whether the footing has moved enough that replacement is the better money. Under Clause 1, the price for either path is written before we start. If the fence is part of a larger exterior project, our home services cover the walls, windows, and hardscape around it.
Privacy Fence, Fence Gates, and Commercial Fencing
Privacy fences are the six-foot and eight-foot cedar or vinyl runs that screen a backyard, and the height and board-to-board spacing are the two specs that decide how much they actually block. Fence gates get their own set of hardware: hinges, latches, and a brace that stops the sag that shows up on every gate built without one. Commercial fencing covers perimeter and screening work on commercial lots, where we build to the access and setback requirements the site demands.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands and Materials We Work With
Material choice is where a fence budget is won or lost, and we are specific about what goes into each quote. On fences attached to a home or a hardscape edge, we match the trim detail to the James Hardie fiber-cement profiles we use on exteriors so the new run sits next to the house without a visual seam. For homeowners finishing an outdoor room alongside the fence, we can align the hardscape and the privacy screen to the same plan as a KraftMaid or Wellborn outdoor storage or cabinetry setup, which keeps the detail consistent across the whole yard.
We work with cedar and pressure-treated lumber, galvanized and vinyl-coated chain link, PVC vinyl, powder-coated aluminum, and ornamental iron, and we name the grade, gauge, and post spacing on the written quote every time. Whether your project calls for a familiar brand or any other make of material, we can build the run to spec and put the price on paper first. For exterior planning that goes beyond the fence line, our Fence Installation in Haltom City page shows how we handle neighboring lots with the same approach.
Signs You Need Fence Installation Right Now
- Posts that lean or wobble by hand. When a post moves, the concrete footing has lost its grip on the clay, and every panel hung from it is under stress. Patching the panel does not fix the footing, and the fence will keep failing until the post is reset or the run is rebuilt.
- Rot or soft wood at the bottom of the pickets. Ground contact is where wood fails first in Fort Worth, and the failure is usually invisible from the street side. Push a screwdriver into the base of a few pickets; if it sinks, the moisture has been in the wood for a while.
- A gate that drags, sticks, or will not latch. A dragging gate is usually a sagging post rather than a hinge problem, and a gate that will not latch is a security gap. Gate re-hang and post reset are among the repairs we quote most often.
- Cracked or heaved concrete along the post line. Cracked footings and heaving along a fence run point to soil movement, not just to the fence. We inspect the footing before we quote so the repair addresses the cause and does not just cover it.
- A boundary that no longer meets your needs. A low chain link run that was fine for a yard without pets or a pool can become the wrong fence once kids, dogs, or a new pool go in. Replacing or raising the line is a straightforward scope, and we write the price before we start.
Our Fence Installation Process – Step by Step
- 1
On-site measure and property line check. We walk the run, measure the length and the gates, and confirm the footprint against your plat and any homeowner association rules. That step is where a fence project goes wrong quietly, and we would rather find it before the post holes are dug.
- 2
Written price and written scope. You get a flat price, a written scope, and a written warranty before any work starts, with the material grade, post spacing, and footing spec listed line by line. Under Clause 1, no work proceeds until you have signed off on the number.
- 3
Material and site prep. We confirm the material delivery and set the layout string so the run is straight and the corners are square. Any change from the agreed scope becomes a signed change order before the crew touches it, which is how projects finish within a few percent of the agreed cost.
- 4
Post setting and panel installation. Posts are set below the clay’s active layer and set in concrete to the depth the footing spec calls for, then cured before the panels go on. Panels, rails, and gates are then hung and braced, and we check every gate for swing and latch before we call the run finished.
- 5
Photo record, walkthrough, and warranty documentation. We photograph the footings, the finished run, and the gate hardware, then walk the fence with you and hand over the written warranty. The photo record is included as standard on every visit, not an add-on.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Fort Worth?

A typical vinyl fence installation in Fort Worth runs $3,500 – $9,000, and an aluminum fence installation runs $4,000 – $10,000. Those ranges are the real numbers for a standard residential run, and the quote you get from us is a flat price inside them, not an estimate that moves once the crew arrives.
What moves the number is linear footage, fence height, gate count, how many post holes hit rock or need to be hand-dug, and whether removal of the old fence is in the scope. Material grade is the other lever: cedar and heavy-gauge PVC cost more up front than chain link but hold their look for years, and aluminum and iron price by the wall thickness and the weld. A quote that does not name the gauge, the grade, the post spacing, and the footing spec is a number you cannot compare against anyone else’s.
The way to avoid overpaying is to get the same four specs listed on every quote and compare them line by line. Our free estimate includes the written scope, the material specification, the footing depth, and the warranty language. If you have a competitor’s quote in hand, our Free Second Opinion will review it line by line at no charge so you can see where the scopes actually differ.
Fence Installation Near Fort Worth – Our Service Area
We handle fence installation in Fort Worth and the surrounding cities, including Haltom City, Richland Hills, Watauga, North Richland Hills, Forest Hill, Hurst, Kennedale, Keller, Bedford, Colleyville, and Arlington. Scheduling for the nearer cities is quick, and the outer cities are scheduled by route, so call and we will give you a real date. See our Fence Installation in Richland Hills page for a closer look at how we handle neighboring lots.
Serving Fort Worth, TX – Our Local Coverage Area
We serve Fort Worth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Fort Worth

Fence installation is setting posts in concrete, hanging panels or pickets, and hanging gates on a residential or commercial property line, and you need it when the existing fence has failed structurally or when a new boundary has to be defined. It is different from fence repair, which swaps failed sections on a run that is still sound. We quote both paths and tell you which one makes more sense. Call (833) 570-6084 and we will walk the line with you.
Most residential fence installations in Fort Worth take one to three days on site, with the post cure adding time before the panels go on. A short chain link run can finish in a day, while a long privacy run with multiple gates and old-fence removal runs longer. We put the schedule in the written scope so you know what to expect before the crew arrives.
A vinyl fence installation in Fort Worth typically runs $3,500 – $9,000, and an aluminum fence installation runs $4,000 – $10,000, depending on linear footage, height, gates, and the condition of the ground. The flat written price we quote falls inside those ranges and does not move unless the scope changes by signed order. Call (833) 570-6084 for an exact quote, and estimates are free.
Fence permit requirements in Fort Worth depend on the fence height, the setback from the property line, and whether the lot is on a corner, and homeowner association rules stack on top of that. We confirm what is required for your address during the on-site measure and list it in the written scope. Permits pulled and inspections passed are part of how we work, so it is not something you have to chase down.
No, the price does not change unless you approve a change order. The quote is a flat price with a written scope and a written warranty, and no work proceeds on a change until the change order is signed. That discipline is why Rowan projects finish within a few percent of the number the customer agreed to. If a post footing turns out rockier than the site walk suggested, we bring you the change order with the number on it before anyone touches the ground.
Every fence installation carries the 365-Day Done Right Promise: if it is not done right, we make it right. That promise is backed by The Haven Standard and a written warranty rather than a handshake, and the terms go on the quote. The manufacturer warranty on the material is separate and comes with the product paperwork.
Clear the fence line of furniture, planters, and anything that would block the crew’s access, and flag any sprinkler heads or buried irrigation lines in the run. If a dog will be in the yard, plan for it to be indoors or elsewhere on install days. We set the layout string and confirm the footprint with you before any holes are dug, so the last chance to move the line is at that step.
Schedule Your Fence Installation Service in Fort Worth Today
Call (833) 570-6084 to schedule a free estimate for fence installation in Fort Worth. You get a flat written price, a written scope, and a written warranty before any work starts, plus a photo record of the finished run and 365-Day Done Right Promise coverage behind it. No pressure to book on the call, and no obligation. If you already have a competitor’s quote, bring it and we will give you a free second opinion line by line.
Written by the team at Rowan Construction Group.












