







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Construction in Richland Hills, TX
Construction in Richland Hills, TX is mostly renovation work: this small inner-ring suburb of Fort Worth was built out during the postwar boom, so the housing stock is 1950s through 1970s ranch homes on concrete slab foundations, not new greenfield builds. That means window and door replacements here start with square, settling openings rather than fresh framing, and every project has to work around tight, mature lots. We put a written price in front of you before any tool comes out. Call (833) 570-6084 to schedule a free estimate.
Why Richland Hills Homes Are Different
Richland Hills is fully landlocked and built out. There’s no room for large new subdivisions, so the work here concentrates on the existing housing stock: ranch homes from the 1950s through the 1970s, many still carrying original cast-iron plumbing, aluminum wiring in some, and the small closets and bathrooms that era produced. North Texas heat and expansive clay soils drive most of what we’re called about. The clay shrinks and swells with the seasons, which moves foundations and racks window frames out of square; the summer heat bakes the exterior envelope and pushes homeowners toward window, insulation and roofing upgrades.
Permitting in Richland Hills runs through a city process sized for a small municipality, which often moves faster and more personally than Fort Worth’s, but inspections are strict because there’s no land on the edges to absorb mistakes. Detached garages and carports are common and frequently converted or rebuilt. All of that changes how a job is scoped, priced and sequenced.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Main Richland Hills Services
These are the two projects Richland Hills homeowners call about most often, and each has its own dedicated page with local pricing and detail.
Driveway & Pavers in Richland Hills
Driveway work in Richland Hills runs into the same clay that moves foundations. A slab that heaved or cracked over a shrink-swell cycle needs the base addressed before new concrete or pavers go down, or the replacement fails within a few seasons. Mature lots also mean tight approaches and low clearance between the garage and the street, so equipment and drainage both have to be planned. We quote pavers and concrete separately so you can compare the two on paper. See Driveway & Pavers in Richland Hills.

Fence Installation in Richland Hills
Post holes in this ZIP hit the same expansive clay, and a fence set in it without proper depth and drainage will lean within a couple of years. The postwar lots here are narrow, with property lines close to the house, so survey accuracy matters before anyone digs. We set posts to depth, brace them correctly, and pick materials that hold up to North Texas sun without warping. Vinyl and aluminum both work well on these lots. Full detail lives at Fence Installation in Richland Hills.

Home Additions & ADU in Richland Hills
Adding square footage to a Richland Hills ranch means tying new construction into an existing settling slab, and that’s where this city gets tricky. Many additions here need pier-and-beam work or an engineered slab to bridge the old foundation and the new one, and the tight lot lines make staging harder than it would be on a Fort Worth greenfield site. Setbacks and impervious-cover limits get checked early. We scope that structural tie-in before quoting. More at Home Additions & ADU in Richland Hills.

Bathroom Remodeling in Richland Hills
The bathrooms in these 1950s-70s homes are small, and many still have cast-iron drain lines under the slab. A remodel that ignores the drain condition turns into a re-pipe halfway through, so we scope the plumbing before demolition. The payoff here is real: a walk-in shower or tub-to-shower conversion gains usable space in a footprint that felt cramped. Exact pricing and finish options are at Bathroom Remodeling in Richland Hills.
Kitchen Remodeling in Richland Hills
Kitchens in postwar Richland Hills homes were built for a different era of living, with small closets and closed-off walls. Opening a kitchen to the living space is the most common request we get here, and it starts with checking which walls carry load before anything comes down. Cabinet and countertop choices matter more than people expect on a small footprint, which is why we quote KraftMaid and Wellborn lines side by side. Everything’s at Kitchen Remodeling in Richland Hills.
Windows & Doors in Richland Hills

Windows and doors are the first place Richland Hills homeowners feel the age of these postwar ranches: 1950s-70s single-pane glass lets the North Texas sun pour heat straight into a room, and the expansive clay under every slab quietly racks frames out of square over the years, so a window that sealed tight a decade ago now sticks or drafts. We install and replace both under a written price, and you can see the full range of what we handle on our Windows & Doors hub. Impact-rated options and standard replacements both come with a documented photo record of the openings before and after.
Window Replacement
Signs you need it
You feel heat radiating off the glass in July, the frame won’t close flush, or you can see daylight at the edge of the sill after a dry summer.
What it costs in Richland Hills
A full window replacement project here typically runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000.
How we do it
We measure every opening, check the framing for square and rot, set the new unit with proper flashing and sealant, and photograph the finished install for your record.
Door Installation
Signs you need it
The door drags on the threshold, the frame has separated from the wall, or a storm has left an exterior door warped and leaking.
What it costs in Richland Hills
Exterior and interior door installation is quoted as a flat written price per opening, scoped to the specific door you choose.
How we do it
We pull the old unit, true the rough opening, install the new door plumb and level, and verify the weather seal and hardware before we leave.
What Windows & Doors Costs in Richland Hills
| Item | Typical range in Richland Hills |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Door Installation (per opening) | Quoted per door, written before work |
Do I need impact windows in Richland Hills?
Not required by code, but impact glass is worth considering on these postwar homes because it resists hail and summer heat gain. It costs more, from $8,000 – $25,000, and we’ll write the comparison for you.
How long does window replacement take in Richland Hills?
Most whole-home replacements on a Richland Hills ranch run two to three days once materials arrive. We schedule around the framing check and seal each opening before moving on. Estimates are free.
Roofing in Richland Hills

Roofing in Richland Hills is a replacement market, not a new-construction one: the original shingle roofs on these 1950s-70s ranches have been replaced at least once, and North Texas hail and summer heat shorten every roof’s life. The clay soil adds a wrinkle, because when a slab shifts, the roof line can move with it and open gaps at the flashing. We handle repair and full replacement under a written price, and the full scope sits on our Roofing page.
Roof Repair
Signs you need it
You spot missing or lifted shingles after a storm, a ceiling stain appears, or flashing pulls away from a wall where the roofline has shifted.
What it costs in Richland Hills
Roof repair here typically runs $400 – $1,800, and tile roof repair runs $600 – $2,500.
How we do it
We inspect the deck and shingle layer count, photograph the damage, match the existing material, and repair to a written scope.
Roof Replacement & Installation
Signs you need it
The roof is past 15 years, shingles are granulating into the gutters, or you’ve had the same leak patched twice in two seasons.
What it costs in Richland Hills
A full roof replacement here typically runs $8,000 – $20,000, and metal roof installation runs $15,000 – $40,000.
How we do it
We tear off to the deck, replace any soft sheathing, install new underlayment and flashing, then lay the shingle or metal system specified in your quote.
What Roofing Costs in Richland Hills
| Item | Typical range in Richland Hills |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Does Richland Hills require a permit to replace a roof?
Yes, roof replacement goes through the city’s permitting and inspection process, which is sized for a small municipality. We pull it and pass inspection for you. Estimates are free.
Will my insurance cover a hail-damaged roof in Richland Hills?
Often yes, if the damage is documented. We photograph the shingle layer count, hail hits and soft metal, then hand you the record for your claim. Call for an exact quote.
Brands We Service in Richland Hills
We work with fifty-plus vetted material brands, including James Hardie siding and trim and KraftMaid cabinetry, and quote them side by side so the number is honest rather than inflated. We claim no stocked parts, and material lead times vary by brand, so we confirm the turnaround when we write your price. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Construction in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
What pushes price up in Richland Hills is usually what’s underneath: foundation movement that has to be tied into new work, cast-iron plumbing that surfaces mid-project, or aluminum wiring found behind a wall. Every quote is a flat written price with a written scope, and no change proceeds without a signed change order, so the number you agree to is the number you pay within a few percent.
Neighborhoods We Serve in Richland Hills
Richland Hills is compact, so we cover the whole city and the surrounding ZIP 76118 area without long travel between jobs. Most visits are scheduled within a day or two of your call, and we confirm the appointment by text. Areas we work in regularly include:
- Baker Boulevard and the neighborhoods feeding it
- The streets off Glenview Drive
- Meadowbrook and the older central blocks
- The residential pockets near the Richland Hills rail corridor
- Homes bordering North Richland Hills and Haltom City
Service Area – Cities Near Richland Hills
Richland Hills sits in the heart of northeast Tarrant County, and we work the cities that touch it: Hurst, TX, Bedford, TX, North Richland Hills, TX and Haltom City, TX. If you’re just over the line from Richland Hills, the same contractors and the same written-price process apply. You can also start at our home page to see every trade we cover.
Serving Richland Hills, TX – Our Local Coverage Area
We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Construction in Richland Hills
We schedule most estimates and site visits within a day or two of your call, and a live person answers around the clock to book it. You’ll get a written price before any work starts.
Yes. Richland Hills runs its own permitting and inspection process, sized for a small municipality and often faster than Fort Worth’s. We pull the permits, schedule the inspections and pass them, and none of it happens without your approval.
That’s most of what we do here. The city is built out on 1950s-70s slabs, so we scope for foundation movement, cast-iron drain lines and aluminum wiring before quoting. Call (833) 570-6084 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












