







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact Windows Cost in Fort Worth, TX: What You’ll Actually Pay
Impact window installation in Fort Worth runs about $650 to $1,100 per standard double-hung window, installed, and most full-home jobs land in the $8,000 to $25,000 range. Larger openings cost more: casements sit at $750 to $1,300 each, and picture windows run $900 to $1,600. A written line-item price comes before any work starts, and a live person answers the phone 24/7 at (833) 570-6084. Fort Worth is 400 miles from the Gulf, so the case here is hail, freeze cycling and heat, not storm surge.

Why Fort Worth Needs Impact Windows For a Different Reason Than the Coast
Coastal Texas buys impact glass to survive named storms. Fort Worth buys it for a quieter, more frequent threat. Tarrant County tracks large hail almost every spring, and a standard sealed unit (two panes fused into an insulated glass unit, or IGU) takes the hit and fails at the edge where the seal gives. Once that seal breaks, the window fogs and loses most of its insulating value. Impact-rated glass is laminated with a plastic interlayer, so the pane holds together around the strike instead of shattering through.
Then there’s the summer. Fort Worth crosses 100°F regularly, and the west- and south-facing glass in a 1990s or 2000s brick-veneer home takes that heat load directly. A properly coated impact unit blocks that radiant gain. And after Uri, freeze pressure differentials stressed a lot of older units that were already marginal. The repair cost is real money, and impact glass absorbs all three hits better than builders-grade stock.
Fort Worth Impact Window Cost by Window Type
These are installed prices for this market. What drives the number up is frame material, glazing spec and how the wall has to be detailed.
| Window type | Installed price range |
|---|---|
| Standard double-hung, impact-rated | $650 - $1,100 each |
| Casement, impact-rated | $750 - $1,300 each |
| Picture window, impact-rated | $900 - $1,600 each |
| Full-home impact window installation | $8,000 - $25,000 |
| Standard window replacement (non-impact) | $4,500 - $15,000 |
| Historic-district frame upgrade (wood-clad or aluminum-clad vs. vinyl) | +$150 - $400 per window |
Those per-window ranges are the honest numbers. A quote that only names a lump total without naming the spec is one you can’t compare against anything. Our impact window work sits inside Windows & Doors, and every quote is a flat written price with a written scope and a written warranty.

The Low-E Decision That Actually Changes Your Energy Bill
Low-E coating is a microscopically thin metallic layer that reflects radiant heat. The number that matters is the Solar Heat Gain Coefficient (SHGC): the lower it is, the less summer heat gets in through the glass. A low-SHGC spec blocks west- and south-facing heat, but it also cuts the passive solar warmth that helps in winter. Fort Worth’s 100°F summers outweigh its mild winters, so a low-SHGC spec is the right default here. That decision alone is worth $200 to $400 a year on the energy bill, which is more than comfort. A quote should name the SHGC rating and the argon fill between the panes, so you can see what you’re paying for.
Where Fort Worth Windows Get Complicated
Fort Worth construction splits into two very different realities, and windows land on both. Look at the Fairmount and Near Southside bungalows versus the brick-veneer tracts pushing north and west.
Historic-district review in Fairmount and Near Southside
In the Near Southside and Fairmount, a street-facing window change on a century-old bungalow or pier-and-beam four-square goes through Fort Worth’s Historic and Cultural Landmarks Commission (HCLC) before you can pull the permit. The review requires the replacement to match the original profile, which usually means wood-clad or aluminum-clad frames rather than vinyl. That’s the $150 to $400-per-window gap generic estimates skip. We flag it on the quote so there are no surprises at review.
Brick-veneer openings in 1990s-2010s homes
Out west and north, most of the housing stock is brick-veneer on slab. Pulling a window out of a brick wall means managing water at the brick mold, the trim where the window meets the masonry. That takes flashing and proper water detailing, which a wood-frame house doesn’t need. Skip that step and you trade a small install savings for a water-intrusion callback later. We describe the substrate condition plainly on the photo record and explain what it means before we touch anything.
What a Rowan Written Quote Names
Under Clause 1 of The Haven Standard, the price is written before anyone starts. For a window, that means the quote should name every one of these, and if a competitor’s doesn’t, you can bring it in for a free second opinion and we’ll review it line by line at no charge:
- Frame material: vinyl, wood-clad or aluminum-clad, called out by name
- Glazing spec: Low-E coating type, argon fill, SHGC rating
- Impact rating standard: ASTM E1996 or Miami-Dade NOA, identified
- Installation method, including flashing and water detailing at the brick mold
- The 365-Day Done Right Promise: if it’s not done right, we make it right
Common Fort Worth Window Scenarios We Walk Into
In Alliance and Far North, we regularly see new-tract homes from the 2000s where the original builder-grade units are fogging at the seal after a few hail seasons. In the Fairmount bungalows, it’s original wood windows that a homeowner wants weathertight without losing the profile review demands. On the west side, it’s brick-veneer homes where a previous installer skipped the flashing detail and the brick mold is already showing water staining. Each one gets a different spec and a different number, which is why a per-window range beats a single lump quote. Our technicians have up to 19 years of experience, and they’re background-checked and uniformed, with a documented photo record on every visit included as standard.
How Insurance Premium Offset Works in Tarrant County
Impact-rated windows can lower your homeowners premium because they reduce the chance of a hail claim, but the offset timeline depends on your carrier and your deductible. Higher-frequency hail in Tarrant County tends to speed up that payback relative to a quieter market. Ask your insurer for the credit in writing before you buy, then compare it against the installed price. It’s a real number, and it belongs in the decision alongside the energy savings.
FAQs
Impact windows in Fort Worth cost $650 to $1,100 per standard double-hung window installed, with full-home jobs typically running $8,000 to $25,000. Casements ($750 to $1,300) and picture windows ($900 to $1,600) cost more per opening. Call (833) 570-6084 for an exact written price; estimates are free.
Yes, for a different reason than coastal buyers: Fort Worth’s annual hail and heat load, not hurricane surge, is what destroys standard units. Laminated impact glass holds together on a hail strike, and a low-SHGC spec cuts summer heat gain by $200 to $400 a year. A written price helps you weigh that against the up-front cost.
It can add $150 to $400 per window on street-facing facades in Fairmount and the Near Southside, because the HCLC review usually requires wood-clad or aluminum-clad frames instead of vinyl. We build that into the written quote up front rather than discovering it at review. Call (833) 570-6084 to talk through your block.
Yes, but the brick mold needs flashing and proper water detailing that a wood-frame house doesn’t require, and that step is what keeps the install weathertight. Skipping it invites a water-intrusion callback. Our quote names the installation method so you know the detail is included. Free second opinion on any written estimate.
Get a Written Number Before Anyone Picks Up a Tool
Impact windows are a real investment in a Fort Worth home, and the price depends on the spec, the wall and the district. We put the number in writing, name every material, and back the work with the 365-Day Done Right Promise. Call (833) 570-6084 for a free estimate, and see how we handle the rest of the home on our Fort Worth service area page.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth, TX.
What Our Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












