







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Refacing Kitchen Cabinets Costs in Fort Worth, TX - And When It’s the Wrong Call
Refacing a standard 10×10 kitchen in Fort Worth runs $4,200-$8,500 in materials and labor, and a full kitchen remodel that includes refacing and new counters lands between $14,000 and $45,000. That refacing number assumes the existing boxes are square, dry, and standard-depth. In a 1920s Fairmount four-square, they often aren’t. Call Rowan Construction Group Fort Worth at (833) 570-6084 for a free written line-item quote that tells you which column you’re in before anyone touches a door.
Key Takeaways
- Refacing a typical Fort Worth kitchen: $4,200-$8,500. Cabinet installation (full replacement): $4,000-$13,000.
- Non-standard 11- or 13-inch-deep boxes in Near Southside and Fairmount bungalows add $300-$800 in custom-width veneer.
- A full kitchen remodel in Fort Worth runs $14,000-$45,000; a small kitchen remodel runs $9,000-$20,000.
- We quote a written price before any demo starts, including a box-condition assessment.

Why Fort Worth’s Older Bungalows Change the Math
Fort Worth’s housing stock splits sharply, and that split decides whether refacing makes sense. In the Near Southside and Fairmount you’re standing in century-old Craftsman and Prairie bungalows, many on pier-and-beam foundations. North and west, it’s 1990s-to-2010s brick-veneer homes on slab. The two behave nothing alike under a cabinet door.
Those older piers sit on expansive clay soil that swells and shrinks through Fort Worth’s wet-dry cycles. Over decades, cabinet boxes absorb that humidity cycling and go out of square. Some were built in place at non-standard depths: 11 or 13 inches instead of the modern 12 or 24. When a box is off-plumb by a quarter inch or built to a non-standard depth, you can’t hang a stock veneer panel. You need a custom-width strip, and that’s the $300-$800 swing per run of cabinets that resets the whole estimate.
Fairmount’s historic-district overlay matters too. Front-facing exterior changes and additions route through the Historic and Cultural Landmarks Commission before you can pull a permit. Refacing itself is interior finish work, so it rarely triggers review. But if you’re also touching a window or adding on, the timeline stretches. We build that into the schedule rather than discovering it mid-job.
What Actually Goes Into a Refacing Quote
A bundled “refacing” figure hides four separate costs. Here’s how we break each line, so you can compare a written quote to another written quote instead of two vague numbers.
| Line Item | Fort Worth Range |
|---|---|
| Veneer or rigid thermofoil (doors, drawer fronts, end panels) | $1,800-$3,500 |
| Door-only order (KraftMaid or Wellborn) | $1,200-$2,800 |
| Hinge and hardware replacement | $300-$900 |
| Box repair (re-squaring, re-gluing, re-facing) | $400-$1,200 |
| Custom-width veneer (non-standard 11″ or 13″ depth) | $300-$800 |
| Total refacing project | $4,200-$8,500 |
For context, a full kitchen remodel including refacing and new counters sits at $14,000-$45,000, a small kitchen at $9,000-$20,000. Countertop installation runs $2,000-$6,500 (Cambria and Caesarstone are the brands we quote most); a backsplash adds $800-$2,500; a kitchen island adds $3,000-$10,000.
Notice what drives the swing: box condition, not door style. A cheap door on a rotten box is money down the drain. An honest quote assesses the box first. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and nothing moves on a change until you sign the change order. That discipline is why our projects finish within a few percent of the agreed number, across 4,000-plus jobs.

Refacing vs. Full Cabinet Replacement: Which Is Cheaper in Fort Worth?
Refacing is cheaper when the box structure is solid and the layout stays the same. Full replacement with semi-custom cabinets closes the gap when the boxes are failing, the depth is non-standard enough that custom veneers pile up, or you’re reworking the layout anyway.
Here’s the fork we walk customers through:
- Reface when boxes are dry, square, and standard-depth, and you like the footprint. You get new fronts, hinges, and hardware for $4,200-$8,500.
- Replace when the boxes have water damage, aren’t square, or need custom strips on every run. Cabinet installation runs $4,000-$13,000 with KraftMaid or Wellborn, giving you new boxes at the correct depth.
- Reface + counters when the boxes are fine but the top is tired. That blends a $2,000-$6,500 countertop install with the refacing line.
The honest answer to “which is cheaper” depends on the box, and the only way to know is to measure it. You can read more about full-scope projects our team handles on our Kitchen Remodeling in Fort Worth page, but the number you need starts with someone putting a level on your cabinets.
How Our Written Quote Process Works
Rowan Construction Group Fort Worth is a construction contractor, not a door-hanging shop. We connect you with the trades that do the work, and we put the price in writing first. That means a line-item quote, including the box-condition assessment, before anyone signs a work order.
The visit works like this: a background-checked, uniformed technician arrives, measures the boxes and the runs, checks plumb and moisture, and photographs everything. That photo record is a standard deliverable, not an add-on. You get it with the written price. If you’re holding a competitor’s estimate, we’ll review it line by line at no charge through our Free Second Opinion.
Sourcing matters to the number. Our crews draw from more than fifty vetted brands: KraftMaid and Wellborn for cabinets, Cambria and Caesarstone for tops, Kohler and Toto for fixtures. Real spec sheets keep the quote honest instead of padded. Our technicians have up to 19 years of experience, and a live person answers the phone 24/7 during Fort Worth’s storm season.
Scheduling Around Fort Worth’s Heat
There’s a hidden scheduling cost nobody puts on a refacing quote. Fort Worth summers above 100°F change how adhesive-based veneer systems cure. Peel-and-stick veneer in a garage or an unconditioned back room can lift before it sets. We schedule veneer work in conditioned spaces and factor cure time into the timeline, which sometimes means spreading a project across a couple of extra days in July and August. Better a slow cure than a bubble behind a door.
For a full remodel scope, see our Kitchen Remodeling service page. If your project grows into an addition, we can talk through it, and most homeowners start by returning to our home page to map the trades.
FAQs
Refacing a standard kitchen in Fort Worth runs $4,200-$8,500 in materials and labor. Non-standard box depths in older bungalows add $300-$800, and box repair adds $400-$1,200. Call (833) 570-6084 for an exact written quote, and estimates are free.
Refacing is usually cheaper when the boxes are solid and standard-depth, saving roughly half the cost of a full replacement. If the boxes are failing or need custom veneer on every run, replacement at $4,000-$13,000 closes the gap. Call (833) 570-6084 for a line-item quote that shows you which is cheaper for your kitchen.
We schedule box-condition assessments within a few business days across Fort Worth, and you’ll have a written price before any work begins. Every visit includes a documented photo record, and a live person answers when you call, 24/7. Call (833) 570-6084 to book.
Yes. Countertop installation runs $2,000-$6,500 and backsplash installation runs $800-$2,500, both quoted in the same written scope as refacing. Call (833) 570-6084 for a combined written estimate.
Get a Written Refacing Price Before You Commit
Get the number in writing before anyone starts. Rowan Construction Group Fort Worth delivers a line-item quote, including the box-condition assessment, so you know whether refacing or replacement is the cheaper path for your Fort Worth kitchen. Every project is backed by our 365-Day Done Right Promise. Call (833) 570-6084 for a free estimate today.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth, TX.
What Our Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












