







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Kohler Construction
Rowan Construction Group Fort Worth provides independent Kohler fixture service, installation, and remodeling for homeowners across Fort Worth, TX. We work on Kohler toilets, tubs, shower bases, faucets, and vanity suites every week, and we know the model-specific quirks that trip up generalists: which cartridges fit which valve body, which cast-iron tubs are worth saving, and which trim finishes hold up to North Texas water. We are an independent Kohler service provider, not affiliated with or authorized by Kohler.
Fort Worth’s construction market runs on two tracks at once. Explosive greenfield growth out toward Alliance and Walsh Ranch keeps new bathrooms moving through current code, while century-old bungalows in the Near Southside and Fairmount carry historic-district overlays that trigger Landmarks Commission review before any exterior change can pull a permit. Kohler fixtures show up in both worlds, and the repair heuristics are not the same. Under Clause 1 of The Haven Standard, the written price comes before anyone picks up a tool.
Call (833) 570-6084 to schedule a free estimate on your Kohler project.
Why Trust Rowan Construction Group Fort Worth for Your Kohler Construction?

Our technicians have up to 19 years of experience, and a good share of that time has been spent with Kohler’s valve platforms and finish codes. That matters more than it sounds. Kohler trim collections like Purist, Forté, and Devonshire sit on specific rough-in dimensions, and a handle that “should fit” often doesn’t because the pressure-balance cartridge is the wrong generation. We verify the valve model before we order anything.
Warranty-safe service means we use genuine Kohler replacement parts where finish and fit matter, and we document what we pulled and what we installed. The customer gets a photo record of the job on every visit, included as standard, not an upgrade. If a fixture is under Kohler’s limited warranty, mishandling it with the wrong part or a rough removal can complicate the claim, so we treat that carefully.
Every project is quoted with a flat written price and a written scope before work begins, across all seven trades. If something unexpected turns up mid-job, no work proceeds on the change until the change order is signed. That discipline is why projects finish within a few percent of the number the customer agreed to. Crews are background-checked and uniformed, a live person answers calls 24/7, and you can bring a competitor’s written estimate for a Free Second Opinion line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Fort Worth
Kohler makes durable fixtures, but every line has a failure pattern. Here are the ones we see most in Fort Worth homes.
- Vibrant finish plating pitting or flaking on shower trim. Plated finishes like Brushed Moderne Brass and Vibrant Titanium are the showpiece of the shower, and they’re also the first place hard North Texas water leaves mineral deposits that eat into the plating over time. Once the layer under the finish is exposed, the damage moves faster and the trim usually needs replacement rather than polish.
- Ceramic cartridge and valve failures in Purist and Forté widespread lav faucets. A drip that won’t stop or a handle that turns stiff is usually the ceramic cartridge or the pressure-balance cartridge inside the valve body, not the trim. A generic cartridge swap fixes the symptom for a few months and then the leak comes back, because the tolerance and mineral buildup in the valve body were never addressed.
- Memoirs two-piece toilets leaking at the base or refilling on their own. A leak at the floor gets blamed on the wax ring, but a Memoirs toilet with a failing tank-to-bowl gasket or a fill valve that won’t shut off will produce the same wet floor and phantom refill runs. We check the tank gasket, fill valve, and supply line before we pull the toilet.
- Cast-iron tubs like the Villager and Bellwether losing enamel at the drain or chipping at the overflow. Cast-iron holds heat better than almost anything, which is why owners want to keep them. But once the enamel breaches at the drain or overflow, water reaches the iron and the chipping spreads. That’s the point where the tub-to-shower conversation starts.
- Archer and Underscore shower bases with flex or movement underfoot. A shower base that sounds hollow or rocks slightly usually points to a subfloor or mortar-bed issue rather than the base itself. On Fort Worth’s expansive clay soils, foundation movement can reach a second-floor or slab-adjacent bathroom and put stress on the base seam, so we check the substrate before we blame the fixture.
Kohler Parts & Our Repair-vs-Replace Approach

Parts sourcing is where a lot of Kohler jobs go sideways. We use genuine Kohler replacement cartridges, fill valves, and trim where the finish or the fit actually matters, since an aftermarket cartridge or a knock-off trim piece can void the finish warranty or fail again in a year. For hidden rough-in parts like supply lines, closet bolts, and wax seals, a quality aftermarket part saves the homeowner money without compromising the fixture, and we’ll tell you which is which on the quote.
We don’t claim to stock Kohler parts locally. Parts are ordered to the job based on the model and serial we confirm at diagnosis, which is why we verify the valve generation before ordering rather than guessing at the counter.
Repair versus replace comes down to math, not sales pressure. On an older Kohler cast-iron tub with failing enamel or a valve that’s failed twice, we lay out the repair cost against a replacement or tub-to-shower conversion so the homeowner can decide. If a valve body is sound and only the cartridge is worn, replacing the cartridge is the honest answer. Call (833) 570-6084 for an exact quote. Estimates are free.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact Kohler model and series, photograph the condition, and check the valve body or tank interior before recommending anything. The customer receives the photo record from that visit.
- 2
Written scope and flat price. The quote names the parts, the finish, and the labor in writing, with the scope spelled out. Kohler-specific rough-in dimensions get verified against the fixture before demolition, so the replacement base or vanity actually fits the existing plumbing.
- 3
Repair or install. Genuine Kohler parts go where fit and finish matter. If a cast-iron tub is being swapped for a shower, the drain and valve rough-in get checked before the new base is set.
- 4
Test. We run the fixture through a full cycle: temperature mix at the valve, tank fill and shutoff on the toilet, drain flow on the shower base. For a tub-to-shower conversion, glass and showerhead get tested together.
- 5
Warranty and record. The written warranty and the documented photo record go with the customer, backed by the 365-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Fort Worth
We work across the Kohler lines that come up most in Fort Worth bathrooms and kitchens: Memoirs and Memoirs Stately toilet and vanity suites, Archer and Underscore soaking tubs and shower bases, Purist, Forté, and Devonshire faucet and shower trim collections, and Bellwether and Villager cast-iron tubs. On the remodel side, that covers walk-in showers and shower remodeling, tub-to-shower conversion, and bathroom vanity installation. We don’t stock Kohler locally, so fixtures and parts are ordered to the specific model and finish once the scope is set. That keeps the written price honest instead of padded for inventory that may sit.
We Also Service These Brands
Rowan is a multi-brand contractor, not a single-brand shop. Alongside Kohler, we work with KraftMaid and Wellborn cabinets, Cambria and Caesarstone countertops, GAF and Owens Corning roofing, PGT windows, and Master Halco fencing. That breadth across fifty-plus vetted material brands means the written quote reflects real market pricing and the right product for the job rather than whatever happens to be on hand.
FAQs – Kohler Construction Service in Fort Worth

Is Rowan Construction Group Fort Worth authorized by Kohler? No. We are an independent Kohler service provider with no affiliation to or authorization from Kohler. We work on Kohler fixtures because we’ve done it hands-on for years, not because of a manufacturer relationship.
Do you use genuine Kohler/OEM parts? Yes, on the parts where it matters. Replacement cartridges, fill valves, and trim come from Kohler to preserve fit and finish. On hidden rough-in parts, a quality aftermarket option can save money without affecting the fixture, and we’ll flag which is which in the written scope.
How long does Kohler service take? A cartridge or fill-valve replacement is typically a single visit. A tub-to-shower conversion or vanity installation runs longer and depends on the parts order and the condition behind the wall. The written scope names the timeline up front. Call (833) 570-6084 to get an exact answer for your fixture.
What Kohler models/series do you cover? We service Memoirs and Memoirs Stately toilets and vanity suites, Archer and Underscore tubs and shower bases, Purist, Forté, and Devonshire faucet and shower trim, and Bellwether and Villager cast-iron tubs. If you’re not sure of your model, we identify it at diagnosis.
Will service void my Kohler warranty? Proper service using genuine Kohler parts, documented with a photo record, keeps a warranty claim in good shape. Rough removal or the wrong cartridge can complicate a claim. We handle the fixture carefully and document the work so you have a record.
How much does Kohler construction cost in Fort Worth? It depends on the fixture and scope. Here are the ranges we quote most often:
| Service | Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Shower Replacement | $3,000 – $8,500 |
Call (833) 570-6084 for an exact quote. Estimates are free, and the written price comes before any work starts.
Written by the team at Rowan Construction Group.
Book Your Kohler Service in Fort Worth, TX
Bring your Kohler fixture questions, your model number, or a competitor’s written estimate and we’ll review it line by line at no charge. Call (833) 570-6084 to schedule your free estimate. The written price is in your hands before anyone picks up a tool, backed by our 365-Day Done Right Promise.












