







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose GAF Construction
We provide independent GAF roofing and construction service in Fort Worth: roof repair, full roof replacement and installation, and emergency storm damage work on GAF shingle systems. What sets our GAF work apart is model-level familiarity – we know how Timberline HDZ, UHDZ, Grand Sequoia and Timberline AS II each fail under Fort Worth hail and heat, and we build the repair around that. We are an independent GAF service provider, not affiliated with or authorized by GAF. Every job starts with a written price and a written scope before anyone touches your roof. Call (833) 570-6084 for a free estimate.
Why Trust Rowan Construction Group Fort Worth for Your GAF Construction?

Our technicians have up to 19 years of experience, and that time has been spent on real GAF roofs in North Texas – not on a training slideshow. They can tell a hail bruise from ordinary wear on a Timberline HDZ shingle by feel and by the fracture pattern in the fiberglass mat, which matters because a bruise that hasn’t shed granules yet is easy to miss and easy to underbid.
We install GAF-manufactured accessories – Cobra ridge vent, Pro-Start starter strips – because those are the components GAF’s warranty language actually references. We also work with GAF-certified installation practice on nailing placement, deck prep and ventilation, and every crew member is background-checked and uniformed. Every visit includes a documented photo record as a standard deliverable, so you see the bruised shingles, the exposed nail heads, the decking condition – not just a verbal summary.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. No work proceeds on a change until the change order is signed. And you can bring a competitor’s written estimate for a free second opinion, line by line, before you commit to anything. That’s the record we hand you, in Fort Worth and across every trade we run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Fix in Fort Worth
Fort Worth’s hail and its long, hot summers put specific stress on GAF shingles. Here are the failures we see most and why they happen:
- Hail bruising on Timberline HDZ without visible granule loss. A hailstone can fracture the fiberglass mat underneath a Timberline HDZ shingle while the granules stay put on top. The shingle looks fine from the ground. Months later the bruise becomes a crack, then a leak. This is why a hail inspection has to get on the roof and feel for soft spots, not just photograph the slope.
- Wind uplift at the rake and eave edges on Grand Sequoia. Grand Sequoia’s heavier profile catches wind, and if the enhanced nailing zone wasn’t used – or nails were placed high, above the nail line – the rake and eave edges lift first. Fort Worth spring storm fronts regularly push gusts that find that mistake.
- Granule loss and accelerated aging on south-facing Timberline AS II. South slopes take the most UV and sit over the hottest attic. On Timberline AS II that combination ages the shingle faster than the north slope, so a roof can look ten years older on one side. Inadequate attic ventilation makes it worse.
- Sealant strip failure on Timberline UHDZ in poorly ventilated attics. When attic heat climbs, the sealant strip on Timberline UHDZ can soften and let go, and shingles flutter in wind. Once the strip fails across a slope, you’re re-sealing or replacing, not patching.
- Failed flashing and decking rot at penetrations. Chimneys, skylights and vent boots are where Fort Worth roofs leak first – the flashing sealant dries and cracks in the heat, water gets behind it, and the decking under it rots. On older Fairmount and Near Southside homes, that decking is often original.
A typical pattern: a homeowner notices granules collecting in gutters and dark patches on the south slope after a few summers. An inspection often reveals hail bruising or sealant failure on Timberline HDZ shingles, especially if attic ventilation is inadequate. A qualified local roofer typically replaces the damaged shingles, checks decking and flashing, and may recommend a full replacement if the damage exceeds 100 square feet or the shingles are brittle.
GAF Parts & Our Repair-vs-Replace Approach

We use GAF-manufactured accessories – Cobra ridge vent, Pro-Start starter strips, ridge cap shingles matched to your line – for warranty compliance. Quality aftermarket underlayments and ice-and-water shield are acceptable when the spec calls for them, and we say which we’re using and why in the written scope.
Parts are sourced per job against the written scope, not held in stock. Repair is the honest call for isolated damage under about 100 square feet, provided the shingles around it are still pliable. Replacement is the honest call when shingles are brittle or the roof is over 15 years old – patching brittle shingles just moves the leak. We tell you which one you need and show you the photos behind the answer. Call (833) 570-6084 and we’ll walk you through it.
Our GAF Service Process – Step by Step
- 1
Diagnosis. On-roof inspection with photos: shingle model identified, hail bruising checked by hand, nail placement checked against the line’s nail zone, attic ventilation measured. You get the photo record before we recommend anything.
- 2
Written price and repair/install. A flat written price with written scope lands before work starts – repair square footage, shingle line, underlayment spec, accessory list. Signed before a nail goes in.
- 3
Installation. Decking and flashing checked and repaired where needed, shingles laid to the line’s nailing spec, ridge vent and starter strips installed to GAF’s written requirements.
- 4
Test and walkthrough. Water test at penetrations, visual pass on every slope, and a walkthrough so you see what was done.
- 5
Warranty and photo record. Written warranty in hand, full photo record delivered. The 365-Day Done Right Promise backs the work.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in Fort Worth
We service and install the GAF lines Fort Worth roofs actually carry: Timberline HDZ, the architectural shingle most local homes have; Timberline UHDZ, the heavier premium architectural line; Grand Sequoia, the thick-profile designer shingle; and Timberline AS II, the older three-tab style found on plenty of 1990s and 2000s builds out toward Alliance and the western subdivisions. We handle roof repair, full replacement and installation, and emergency storm damage on all of them, plus ridge vent, starter strips, ridge caps and underlayment. Not sure which line is on your roof? We identify it during the inspection.
We Also Service These Brands
GAF is one part of the work. Across our seven trades, Rowan Construction Group Fort Worth also installs and services KraftMaid cabinetry, Kohler fixtures, PGT windows and doors, and Master Halco fencing. You’re not locked into a single-brand roofer or a single-trade shop – the written price and the documentation discipline run across all of it.
FAQs – GAF Construction Service in Fort Worth

No. We are an independent GAF service provider, not affiliated with or authorized by GAF. Our credibility comes from manufacturer-trained installation practice, a track record of passing local code inspections, and documented work – not a manufacturer authorization. Call (833) 570-6084 with questions about your roof.
It can often be repaired if the damage is isolated and under about 100 square feet and the surrounding shingles are still pliable. If the bruising is widespread or the shingles are brittle, full replacement is the honest call. Hail bruising on Timberline HDZ can fracture the mat without visible granule loss, so the decision has to come from an on-roof inspection, not a photo. Call (833) 570-6084 for an inspection and a written price.
UV exposure and attic heat. South-facing Timberline AS II slopes take the most sun and sit over the hottest attic, which accelerates aging and sheds granules faster than the north slope. Poor attic ventilation makes it worse. A roof that looks ten years older on one side is usually showing this pattern. Call (833) 570-6084 if you’re seeing granules in the gutters.
It depends on the warranty tier and the installer’s GAF certification status, and we won’t claim a tier we can’t back. We install GAF-manufactured accessories like Cobra ridge vent and Pro-Start starter strips to the written requirements, use correct nailing placement, and hand you the documentation – then you can confirm the exact coverage with GAF in writing. Call (833) 570-6084 and we’ll walk through what your install supports.
You check the nail placement against Grand Sequoia’s enhanced nailing zone – nails placed high, above the nail line, are the common mistake, and they’re what causes rake and eave edge uplift in Fort Worth wind. It takes getting on the roof and looking. We check it during inspection and photograph what we find. Call (833) 570-6084 to schedule.
Roof replacement and installation in Fort Worth typically runs $8,000 – $20,000; roof repair typically runs $400 – $1,800. The range depends on roof size, shingle line – Timberline HDZ versus Grand Sequoia – decking condition and flashing work. Your written price is fixed before work starts, with no change orders unless you sign them. Call (833) 570-6084 for an exact quote – estimates are free.
Book Your GAF Service in Fort Worth, TX
Whether it’s a hail-bruised Timberline HDZ slope, a sealant failure on UHDZ, or a full replacement, you get a written price before work starts, a documented photo record, and the 365-Day Done Right Promise behind it. Bring a competitor’s estimate and we’ll review it line by line free. Call (833) 570-6084 to schedule your GAF roof inspection or estimate in Fort Worth.
Written by the team at Rowan Construction Group.












