







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Fort Worth, and what separates our Belgard work is the ground under it: we build bases for expansive clay, not for a brochure photo. Belgard pavers and wall blocks are excellent products, but in North Texas the paver is rarely the point of failure. The base is. As an independent Belgard service provider, we’re not affiliated with or authorized by Belgard, and we say that plainly. What we bring is installation and repair built around Fort Worth’s soil and heat, with technicians who have up to 19 years of experience. Under Clause 1 of The Haven Standard, the price is written before anyone starts. Call (833) 570-6084 for a free estimate.
Why Trust Rowan Construction Group Fort Worth for Your Belgard Construction?

Belgard covers a lot of ground: structural wall systems, permeable pavers, plank pavers, and the joint sand and edge restraint that hold a field together. Our crews work with Mega Arbel, Catalina, Weston Wall, and Dublin Cobble often enough to know how each one behaves once it’s down and the clay starts moving. We use genuine OEM Belgard pavers and wall blocks on repairs so color and dimension match the field you already have, and quality aftermarket base aggregate, geotextile, and polymeric sand where the spec allows it.
Warranty-safe practice matters here. Paver settlement from an under-built base is an installation problem, not a product defect, and a manufacturer will say so. We document base depth, compaction, and drainage in the photo record you receive on every visit, so if a claim ever comes up, you have evidence. No change proceeds on your job without a signed change order, and the written scope and written warranty are flat-priced before work begins. That discipline is why our projects finish within a few percent of the agreed number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Fort Worth
Fort Worth sits on the eastern edge of the Cross Timbers, on expansive clay that swells when it’s wet and shrinks hard in drought. That wet-dry cycle is behind most of what we’re called out to fix.
- Paver settlement and shifting on Mega Arbel and Catalina fields. The pavers themselves are usually fine. What moved is the subgrade. When the clay beneath a shallow or poorly compacted base heaves and settles, joints open, edges drop, and the field goes wavy. Excavating to the correct depth and compacting crushed stone in lifts is the fix, not re-sanding the joints.
- Efflorescence on Belgard pavers. That white mineral haze comes from moisture migrating through the paver and leaving salts at the surface. In Fort Worth it shows up most in spring after heavy rain, and it’s worse where drainage runs back toward the house. Sealing too early, before the paver has dried out, traps the moisture and makes it return.
- Weston Wall block separation and leaning. Segmental retaining walls fail from water and from missing reinforcement. Without proper drainage aggregate and weep points, hydrostatic pressure pushes the wall out. Without geogrid layered into the compacted backfill, the blocks separate and lean. In clay, geogrid isn’t optional.
- Color fading and surface wear. Fort Worth summers run past 100°F, and UV plus traffic on an unsealed field dulls the color and roughens the surface faster than homeowners expect. A breathable sealer applied at the right time slows that. The wrong sealer, or a sealer over a wet paver, does real damage.
- Joint sand loss and edge restraint failure. Polymeric sand washes out where water sheets across a field or where edge restraint wasn’t pinned into the base. Once the sand is gone, pavers walk. Re-sanding without fixing the drainage and the edge just resets the clock.
Belgard Parts & Our Repair-vs-Replace Approach

Genuine Belgard pavers and wall blocks are how we match what’s already in the ground; base aggregate, geotextile, edge restraint, and polymeric sand are quality aftermarket materials specified to the job. We don’t claim to stock Belgard locally. Materials are sourced per project, which keeps the written quote honest instead of padded for inventory.
Repair or replace comes down to how far the base has failed. A localized dip from a settled area near a downspout is a targeted pull-and-rebuild. A field that’s wavy across the whole patio, or a wall that’s leaning past a few degrees, usually points to base and drainage failure under everything, and patching it is money spent twice. We’ll tell you which one you have, show you the photos, and price both if it’s genuinely close.
Bring a competitor’s written estimate and we’ll review it line by line at no charge, before you commit. Call (833) 570-6084 and we’ll get you a number in writing.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We open a joint or pull a paver to see the base depth and what the subgrade is doing. On a wall, we check for drainage aggregate and geogrid in the backfill. You get photos of what we found.
- 2
Written scope and flat price. Material, base spec, drainage plan, and warranty, priced before work starts. For a full replacement we also confirm whether your property triggers Fort Worth’s historic-district review.
- 3
Repair or install. OEM Belgard units go back into the field. Base gets excavated, geotextile laid, crushed stone compacted in lifts, edge restraint pinned, and polymeric sand placed and set. Drainage falls away from the house on purpose.
- 4
Verification. Field checked for lippage and pitch, joints topped, sealer applied only when the pavers are dry. Photo record documents the finished work.
- 5
Warranty. Written warranty in hand, backed by the 365-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Fort Worth
We install and repair Belgard paver patios, paver driveways, and full driveway replacement, along with segmental retaining walls including Weston Wall. On the paver side we work with Mega Arbel, Catalina, and Dublin Cobble, and we match existing fields wherever the original product line is still available. We also handle joint sand replacement, efflorescence treatment, sealer application, edge restraint repair, and drainage corrections on Belgard hardscapes throughout Fort Worth. If you’re not sure which line you have, a photo usually tells us.
We Also Service These Brands
Belgard is one line among fifty-plus vetted brands we work with. We service KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows and doors, which means the hardscape doesn’t have to be priced or scheduled in isolation from the rest of a project. Seven trades, one written scope.
FAQs – Belgard Construction Service in Fort Worth

No. We’re an independent Belgard service provider and we’re not affiliated with or authorized by Belgard. We install and repair Belgard products because we know them well, and we tell you that plainly so there’s no confusion about who stands behind the work. That’s us, in writing.
Yes, for pavers and wall blocks we use genuine OEM Belgard units so color and dimension match your existing field. Base aggregate, geotextile, edge restraint, and polymeric sand are quality aftermarket materials specified to the job. We source per project rather than claiming local stock.
A repair like re-leveling a settled section or re-sanding joints is typically a day or two. A full paver patio or driveway installation usually runs several days to about a week, depending on square footage, base depth, and weather. Summer heat above 100°F can shift the schedule. Call (833) 570-6084 for a written timeline with your quote.
We cover Mega Arbel, Catalina, Weston Wall, and Dublin Cobble, plus standard Belgard paver and wall-block fields. If your product line has been discontinued, we match color and dimension as closely as the current catalog allows and tell you where the match won’t be exact.
Not if the work is done to spec. The bigger risk is the reverse: settlement from an under-built base is classified as an installation issue, not a product defect, and a manufacturer can decline it. We document base depth, compaction, and drainage in your photo record so the installation side is covered.
Here are the ranges we work from in Fort Worth:
| Service | Typical Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
On Fort Worth’s expansive clay, base prep and soil amendment are a bigger share of that number than the pavers are, and skipping it is what produces a callback in two years. Call (833) 570-6084 for an exact quote; estimates are free.
Book Your Belgard Service in Fort Worth, TX
Belgard hardscape in Fort Worth lives or dies on the base under it. We price the base, the drainage, and the Belgard product in one written scope, and we document the work in photos you keep. Call (833) 570-6084 for a free estimate, and bring any competitor’s quote for a free second opinion.
Written by the team at Rowan Construction Group Fort Worth.












