







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Fort Worth: What to Know First
PGT window and door projects in Fort Worth typically run $4,500 – $15,000 for standard replacement and $8,000 – $25,000 for impact-rated units, with most single-window or patio-door jobs finished in one to three days once materials are on site. We’re an independent PGT service provider, not affiliated with or authorized by PGT, and we put the written price in front of you before any work starts.
This page is for Fort Worth homeowners who already own a PGT product: the WinGuard impact line common in newer builds, the aluminum Series 600 and 800 sliders, the vinyl ReliaBilt-era replacements from the 2000s, and the Estate Collection doors. If your glass is fogged, your slider is dragging, or a door won’t latch square, you’ll find the cause and the number below. Call (833) 570-6084 for a free estimate.
How PGT Products Fail – and How We Fix Them
PGT builds a solid product, but Fort Worth’s climate and a few known weak points show up again and again on our callbacks. These are the five we see most.
- Fogged sealed units on WinGuard impact windows (2005 – 2014 builds). The insulated glass unit’s perimeter seal fails after years of thermal cycling between 20°F winter mornings and 105°F August afternoons. The desiccant saturates and the glass clouds from the inside. We replace the sealed unit, not the whole window, when the frame and glazing bead are sound.
- Dragging aluminum sliders on Series 600 and 800 doors. The bottom track fills with fine Texas grit and the rollers flat-spot, so the panel jumps its track and the latch stops lining up. Some homeowners replace the entire slider when a roller-and-track service solves it in an afternoon.
- Failed weatherstripping and sweeps. Fort Worth’s summer UV load dries out the sweep on patio doors and the fin-seal weatherstrip on casements within a few seasons. You feel it as a draft and see it as water on the threshold after a spring storm. We re-sweep and re-seal rather than selling a new door.
- Hinge and multipoint hardware wear on Estate Collection doors. Heavy door slabs settle, the multipoint lock’s center keepers stop engaging, and the door won’t pull tight. We adjust the hinges and re-set the strike plates before touching the lock body.
- Failing impact glazing seals on older WinGuard units. On a handful of older impact windows the laminated assembly’s edge seal degrades and shows a milky border. We confirm whether OEM glass is still available before recommending a path, so you don’t pay for a whole-unit replacement when a glazing swap will do.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
Every PGT job follows the same six steps, and you get a written record of each one.
- 1
Diagnostics. We open, close, and test every operator, measure the frame for square, and check the glass seal. We photograph what we find.
- 2
Parts decision. We tell you whether OEM parts are still produced for your series or if a quality aftermarket equivalent is the honest call, and what that means for any remaining warranty.
- 3
Written price. You get a flat price and written scope before anything is ordered or cut. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
- 4
The work. Glass, hardware, and tracks are replaced and sealed with the correct glazing tape and backer, not a bead of caulk and hope.
- 5
The test. We operate every window and door, check the latch, and run a water test on the threshold where it applies. You watch us do it.
- 6
The record and the guarantee. You receive the photo record and the written warranty, and the 365-Day Done Right Promise covers the work.
What PGT Windows & Doors Costs in Fort Worth
| PGT Job | Typical Fort Worth Range |
|---|---|
| Window Replacement (standard) | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Single-window sealed-unit (glass-only) swap | Quoted line item within the ranges above |
| Sliding and patio door replacement | Quoted line item within the ranges above |
What moves the number: impact-rated versus standard glass, the number of openings, frame condition (a rotten sill on a wood-framed window adds labor), and whether OEM parts are still available for your series. Two-story access and custom sizing push it higher. Nothing on the quote changes once work begins without a signed change order. Call (833) 570-6084 for a free, written estimate you can compare.
See the difference
Before
After
Before
After
Before
AfterWhy Fort Worth Homeowners Call Rowan Construction Group Fort Worth for PGT Work
We’re a construction contractor, not a window shop. That matters when a PGT install runs into a rotten header, a cracked sill, or a door that won’t square because the framing moved. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and a live person answers calls 24/7. Every visit includes a documented photo record as standard.
The 365-Day Done Right Promise means if it isn’t done right, we make it right – not a handshake, a terms page. And if you’re holding a competitor’s estimate, bring it: our Free Second Opinion reviews it line by line at no charge. Windows and doors are one of seven trades we run, alongside roofing, kitchens, and additions, with vetted brands like KraftMaid, Kohler, GAF, and Master Halco behind the work.
FAQs

Does replacing PGT window glass affect my manufacturer warranty? Glass-only replacement by a qualified installer keeps the sash and frame warranty intact in most cases, but you should confirm the terms on your specific PGT paperwork. We’ll tell you honestly whether our work preserves or voids your coverage before we start.
Can you still get parts for my older PGT series? For many Series 600 and 800 components and common WinGuard hardware, OEM parts are still available; where they aren’t, we use a quality aftermarket equivalent and say so up front. Call (833) 570-6084 with the model and year, and we’ll confirm availability.
Should I repair or replace a fogged PGT window? If the frame and glazing bead are sound, replacing just the sealed unit is usually the cheaper, faster fix; if the frame is warped or the sill is rotting, whole-window replacement makes more sense. A diagnostics visit tells you which in under an hour.
How long does a PGT window or door job take in Fort Worth? A glass-only swap or hardware repair is often a single visit; a full replacement set of impact windows typically runs one to three days once materials arrive. You’ll get the timeline in writing with the price.
Do you pull permits for window and door replacement? Where the work triggers a permit, yes – we pull it and pass inspection, and it’s included on the written scope. Call (833) 570-6084 and we’ll confirm what your project needs.
Get Your Written Price
If you own PGT windows or doors in Fort Worth and the glass is fogging, the slider is dragging, or a door won’t latch, get the number in writing before anyone picks up a tool. Rowan Construction Group Fort Worth puts a flat price and written scope in front of you, backs the work with the 365-Day Done Right Promise, and hands you a photo record when the crew leaves. Call (833) 570-6084 for a free estimate.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth and nearby areas.












