







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose PGT Construction
We provide independent PGT construction service in Fort Worth, and what sets our PGT work apart is pattern recognition: we handle PGT WinGuard aluminum and vinyl units, SolarZone insulated glass, and the Aluminum Series sliding doors every week, so we know how those specific systems fail in North Texas heat. We are an independent service provider, not affiliated with or authorized by PGT, and we don’t sell through their network – which means we diagnose the unit in front of us instead of steering you toward a replacement sale. If you own PGT windows or doors and something has fogged, stuck, or stopped sealing, call (833) 570-6084 and we’ll put a written price in front of you before anyone touches the frame.
Why Trust Rowan Construction Group Fort Worth for Your PGT Construction?

PGT builds a good window. The failures we see in Fort Worth are rarely the frame – they’re the components around it. Our technicians have up to 19 years of experience, and that time has been spent learning which PGT assemblies can be repaired in place and which need a full unit swap to keep the impact rating intact. WinGuard aluminum units are a particular specialty: we know how the glazing bead seats, where the weep system clogs, and what a properly sealed IGU should look like when it comes out of the crate.
Warranty-safe practice is the part most homeowners don’t think about until it’s too late. We use OEM PGT replacement IGUs and hardware when they’re available because a spec-equivalent part that misses the original impact or thermal rating can compromise the whole assembly – and it can give a manufacturer a reason to deny a claim on a window you paid a premium for. When OEM parts are unavailable or the lead time doesn’t work, we specify aftermarket IGUs that meet or exceed the original specs and we tell you exactly which rating was matched and how. Under Clause 1 of the Haven Standard, you get the written price first and the documentation after – the photo record of what we found, the parts spec, the warranty in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Fort Worth
These are the PGT issues that come up most often in Fort Worth homes, and what actually causes each one.
- Failed dual-seal IGUs on older WinGuard aluminum units. Fogging or condensation between the panes means the perimeter seal has failed and moisture has entered the cavity. It’s not a cleaning problem and it won’t clear on its own. Older WinGuard units are the most common source we see, and the fix is a replacement IGU matched to the original glazing spec – not a new window.
- Binding stainless-steel rollers and corroded tracks on PGT Aluminum Series sliding glass doors. Fort Worth’s heat and humidity work on the roller assemblies and the track finish year after year, and a door that used to glide starts to drag, then jump, then stick. Usually the panel is fine and the hardware is tired. Replacing rollers and cleaning up the track restores most doors at a fraction of replacement cost.
- Weatherstripping and felt pile deterioration on PGT aluminum windows. The felt pile in the frame and sash channels wears down, which lets water and air past the sash. Homeowners notice a draft, a whistling sound on a windy day, or water staining the sill after a spring storm. This is a seal-and-hardware job, not a glass job.
- Hairline cracks or seal failures in impact-resistant laminated glass. Thermal stress and minor impacts can compromise the laminate layer even when the glass looks intact from a distance. On a WinGuard unit, that matters more than on a standard window because the impact rating depends on the laminate doing its job. We check the laminate, not just the surface.
- Failed flashing and perimeter seals around PGT door installs. The unit is only as good as the opening it sits in. On slab-on-grade homes across the north and west sides of Fort Worth, we regularly find original installs where the sill pan and flashing have aged out, letting water track behind the frame. The door tests fine; the wall around it doesn’t.
PGT Parts & Our Repair-vs-Replace Approach

We don’t stock PGT parts locally. What we do is measure the existing unit precisely, identify the series and glazing spec, and order the correct OEM IGU or hardware for that assembly – or, when OEM lead times or availability don’t line up, an aftermarket part that meets or exceeds the original impact and thermal ratings. You get the spec in writing either way.
The repair-or-replace call is where a lot of PGT owners get pushed. Our rule: cosmetic damage or a single failed component on an otherwise sound unit is almost always worth repairing. Widespread seal failure across multiple units of the same age usually means the batch is at end of life, and piecemeal repair stops making financial sense. We’ll tell you which situation you’re in, in plain terms, with the numbers attached. Call (833) 570-6084 for a free written estimate on either path.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place – glazing seal, rollers, track, weatherstripping, flashing – and photograph what we find. You get the photo record whether or not you hire us.
- 2
Written scope and price. Before any work starts, you get a flat written price with the parts spec and the scope of work. Under Clause 1, no work proceeds until that number is agreed.
- 3
Repair or install. OEM or spec-matched parts go in, frames get resealed to the original profile, and any change to the scope requires a signed change order first.
- 4
Test and document. We operate the door or window through its full range, water-test where relevant, and hand you the written warranty. The 365-Day Done Right Promise backs the work.
PGT Products We Service & Install in Fort Worth
We service and install the PGT lines Fort Worth homeowners actually own: PGT WinGuard Aluminum impact windows, PGT WinGuard Vinyl impact windows, PGT SolarZone low-E insulated glass units, and the PGT Aluminum Series sliding glass doors. That covers impact window installation and window replacement on both new build and retrofit openings, plus glass and hardware service on existing units. If you have a PGT product not listed here, send us a photo of the label and we’ll tell you whether it’s in our lane.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Rowan Construction Group Fort Worth works across the brands in your home, not just one. We service and install KraftMaid cabinetry, Kohler and Toto fixtures, GAF and Owens Corning roofing, and Master Halco fencing, among fifty-plus vetted brands. That matters when a PGT window replacement turns into a roofline flashing repair or a kitchen remodel around the new opening – one contractor, one written scope.
PGT Construction Cost in Fort Worth

Here’s what PGT-related work typically runs in Fort Worth. These are real ranges, not teasers – your exact number depends on unit size, series, and how many units are involved.
| Service | Typical Cost Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair (often paired with window work) | $400 – $1,800 |
A single failed IGU replacement on a PGT WinGuard unit sits well below the full-installation range; a whole-home impact retrofit lands in it. Call (833) 570-6084 for a written line-item quote on your specific units – the estimate is free.
FAQs – PGT Construction Service in Fort Worth
No. We are an independent PGT service provider, not affiliated with or authorized by PGT. We work on PGT products because we know them well, not because we’re in their network. That independence means our diagnosis isn’t tied to a manufacturer sales target – we tell you what the unit needs. Call (833) 570-6084 with questions about your specific PGT product.
Yes, whenever OEM parts are available and the lead time works. We use OEM PGT replacement IGUs and hardware to preserve the original impact and thermal ratings. When OEM isn’t available, we specify aftermarket parts that meet or exceed the original specs and document the match in writing. Call (833) 570-6084 to confirm parts availability for your series.
Most single-unit repairs – an IGU swap, roller replacement, weatherstrip reseal – are a same-visit job once the correct part is in hand. Full window or door replacement depends on the order lead time and the size of the opening. We give you a written timeline with the written price. Call (833) 570-6084 to schedule your free estimate.
We cover PGT WinGuard Aluminum and WinGuard Vinyl impact windows, SolarZone low-E insulated glass, and the PGT Aluminum Series sliding glass doors. For other PGT lines, send a photo of the unit label and we’ll confirm whether it’s in our lane. Call (833) 570-6084 for a quick answer.
Proper service using OEM or spec-equivalent parts, documented in writing, is designed to protect your warranty, not void it. What can cause problems is an unrated aftermarket part that misses the original impact or thermal spec. We match specs and document the part on every job. Call (833) 570-6084 to talk through your warranty situation before work starts.
In most cases you can replace just the IGU – the sealed glass unit – without replacing the window. As long as the frame, sash, and hardware are sound, an IGU swap is the right fix and the cheaper one. Widespread seal failure across multiple units of the same age is when full replacement starts to make sense. Call (833) 570-6084 for a free written estimate either way.
Usually just repairs. A PGT Aluminum Series door that drags or sticks is typically a matter of worn stainless-steel rollers and corroded tracks, not a failed panel. Replacing rollers and cleaning the track restores most doors. We’ll tell you honestly if the panel itself is compromised. Call (833) 570-6084 for a diagnosis.
After a seal failure, the unit loses insulation value but the impact-rated laminate may still be intact – until it isn’t. After a crack or break in the laminate layer, the impact rating is compromised and the unit should be replaced. Either way, we test and document the condition of the laminate, not just the surface. Call (833) 570-6084 for an honest assessment.
Condensation on the inside face of the glass is normal and wipes away. Fog between the panes – inside the sealed cavity – is a failed dual-seal IGU and won’t clear. That’s the distinction. Call (833) 570-6084 and we’ll help you confirm which one you’re looking at, free.
Impact window installation runs $8,000 – $25,000, window replacement runs $4,500 – $15,000, and roof repair paired with window work adds $400 – $1,800. A single IGU replacement on a PGT WinGuard unit sits well below the full-install range. Call (833) 570-6084 for an exact quote – estimates are free and you get the number in writing.
Book Your PGT Service in Fort Worth, TX
PGT windows and doors are worth fixing right, not replacing on a hunch. Whether it’s fogging glass, a dragging slider, or a full impact-window retrofit across a Fort Worth home, we’ll diagnose the specific unit, put a written price in front of you before any work starts, and hand you a documented photo record when we leave. Call (833) 570-6084 for a free estimate.
Written by the team at Rowan Construction Group Fort Worth.












