







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinets & Countertops in Fort Worth, TX
New cabinets and countertops in Fort Worth typically run $9,500 to $28,000 for both, depending on door style, material, and whether the layout changes. That’s the whole job: measured, ordered, delivered, set, and templated for stone. Rowan Construction Group Fort Worth writes that number in a flat-price quote before anyone picks up a tool, and it holds.
This is the trade that decides how a kitchen works. The doors you touch every morning. The surface where you roll dough and set down a hot pan. Get the cabinet box right and the counter sits level for the next twenty years. Get the box wrong and the seams show within a season.
We handle this work under our broader Kitchen Remodeling in Fort Worth service, and it follows the same discipline as everything else we build. Under the Haven Standard, Clause 1 is simple: the price is written down before work starts. No change moves forward until a change order is signed. That’s what keeps 4,000-plus projects within a few percent of the number the customer agreed to.
Call (833) 570-6084 for a free estimate. A live person answers, day or night.

When You Need Cabinets & Countertops
Most Fort Worth homeowners reach for this work for one of a handful of reasons. These are the ones we see most.
- The counter has gone wrong. Laminate lifting at the seams, a chip at the sink rim that keeps catching a sponge, or a quartz edge that cracked when a heavy pot came down on it. Once stone fails at an edge or a joint, patching it is a stopgap, not a fix.
- The cabinet boxes have softened. In older Fort Worth homes near the Trinity River bottoms and in parts of Riverside, moisture creeps into particleboard boxes and the hinges start pulling out of swollen wood. You can see it in doors that sag and won’t stay shut.
- You want to change the layout. Taking down the wall between the kitchen and the breakfast nook, or shifting the range so the work triangle actually works. That means new cabinetry, not just a reface, and often new plumbing and electrical behind the counters.
- The style dates the whole house. Honey-oak raised-panel doors and a speckled 1990s laminate read as a different decade. This matters most in the 32-to-50 buyer bracket, where a kitchen that photographs badly costs real money at resale.
- The pantry or island never fit the room. A too-shallow pantry that swallows nothing, or an island so tight you shuffle sideways past it. Custom sizing solves it where stock boxes can’t.
- Drawers and doors are failing. Undermount slides that won’t close flush, soft-close hinges that popped, a lazy Susan that jumped its track. Sometimes the hardware is all that’s wrong and a full replacement isn’t the honest answer. We’ll tell you which it is.
Our Cabinets & Countertops Process
Five steps, in order. Each one leaves you with something in writing or on camera.
- Measure and document. We measure the room to the sixteenth of an inch and note what’s behind the walls: outlet locations, the water lines, whether the existing boxes are scribed to a wall that’s out of plumb by half an inch. You get a documented photo record of the condition we found, included as standard.
- Written scope and flat price. You receive a flat price with a written scope, a written warranty, and the exact cabinet line and countertop material named. Not “call for a quote.” A number you can screenshot and compare against the next bid.
- Order and confirm. We pull from a vetted brand list, including KraftMaid and Wellborn cabinetry, so the quote carries honest numbers. Lead times vary by line and finish, and we tell you the window up front.
- Set the cabinets. Boxes get leveled and shimmed, fastened to studs, and scribed to the wall. Crown and light rail go on. Any layout change that requires moving a gas line or a circuit is flagged, permitted where Fort Worth requires it, and handled by a licensed trade before the boxes go in.
- Template and install the stone. For quartz or granite, a fabricator templates the installed cabinets on site so the counter fits the actual room, not the drawing. Cambria and Caesarstone slabs get cut with the sink and cooktop openings in place, then set. Seams land where they’re least visible.
One note on safety, because it comes up on every kitchen: if your project involves moving a gas line for the range or reworking an electrical circuit for a new cooktop, that work belongs to a licensed gas fitter or electrician, never a cabinet installer. We coordinate it. We don’t hand you a wrench and a YouTube link.

Cabinets & Countertops Pricing in Fort Worth
Here’s what the work costs in the Fort Worth market, in dollars, so you can compare before you call anyone.
| Line item | Typical range |
|---|---|
| Stock cabinets (10×10 kitchen, both runs) | $4,200 – $7,500 |
| Semi-custom cabinets (KraftMaid, Wellborn) | $8,000 – $16,500 |
| Custom cabinetry | $16,000 – $30,000+ |
| Cabinet refacing (doors and veneer only) | $3,800 – $7,200 |
| Laminate countertop, installed | $1,600 – $3,200 |
| Quartz countertop (Cambria, Caesarstone), installed | $3,800 – $7,900 |
| Granite countertop, installed | $3,200 – $6,800 |
| Butcher block or solid surface | $2,400 – $5,500 |
What moves the number: the cabinet line and door style, the linear feet of counter, the number of seams, whether you add an island or a pantry, and whether the layout changes. A straight swap of boxes and counter in the same footprint sits near the low end. Moving the sink or range pushes it up, because that’s plumbing and electrical work behind the wall.
Every estimate we give is free and comes as a written price before work starts. If you already have a quote from another contractor, bring it in. Our Free Second Opinion reviews any written estimate line by line at no charge. That offer is real, and it’s saved more than one homeowner from a bid with a missing line.
Call (833) 570-6084 and we’ll get you a number.
Key takeaways
- Cabinets and countertops together typically run $9,500 to $28,000 in Fort Worth.
- Quartz and granite get templated to your installed cabinets, not to a drawing.
- Layout changes mean permits and licensed trades for gas and electrical.
- You get a flat written price, a photo record, and a written warranty on every job.
- The 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right.
FAQs – Cabinets & Countertops
How much do new cabinets and countertops cost in Fort Worth?
Expect $9,500 to $28,000 for both cabinets and countertops in a typical Fort Worth kitchen, with stock cabinets and laminate near the low end and semi-custom boxes with quartz near the middle to high end. The largest cost drivers are the cabinet line, the linear feet of counter, and whether the layout changes. Call (833) 570-6084 for an exact written quote, free of charge.
Is it cheaper to reface cabinets or replace them?
Refacing usually costs less than half of a full replacement, roughly $3,800 to $7,200 versus $4,200 to $16,500 for new boxes, and it makes sense when the cabinet boxes are solid. It does not make sense when the boxes have swollen from moisture or the hinges are pulling out of soft wood, because you’ll be putting new doors on a failing frame. We’ll tell you which situation you’re in after we look. Call (833) 570-6084 to set that up.
Can you install cabinets and countertops in the same visit?
No, and no honest contractor can. Cabinets go in first, get leveled and fastened, and then stone is templated against the installed boxes before it’s cut. That gap is deliberate: templating the counter to the real room is what keeps the seams tight and the overhang even. Quartz and granite typically add a templating delay between cabinet set and counter install. We give you the full timeline in the written scope before you commit.
Do you handle the permits and licensed trades for a layout change?
Yes. When a kitchen renovation moves a gas line or a circuit, the work is permitted where Fort Worth requires it and handled by a licensed gas fitter or electrician, not a cabinet installer. We coordinate those trades and fold them into the written scope so the price you agreed to already accounts for them. Every crew member arrives background-checked and uniformed, and you get a documented photo record of the work as it progresses.
Ready to put a number on your kitchen? Call (833) 570-6084 for a free estimate. We’ll measure the room, name the cabinet line and countertop material, and hand you a flat written price backed by the 365-Day Done Right Promise, all before anyone picks up a tool. Our technicians bring up to 19 years of experience to the job, and every visit includes a documented photo record as standard.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth.


