







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Hurst
If your fence is leaning after one too many spring windstorms, or a 1970s cedar line has finally given up along a narrow side yard, we do the work the right way: a written price before anything is ordered, a permit on file, and a panel system rated for the wind Hurst actually gets. We’re Rowan Construction Group, and we connect Hurst homeowners with background-checked, uniformed technicians who have up to 19 years of experience. Call (833) 570-6084 to schedule your free estimate.
Hurst sits in the middle of the Mid-Cities, and its lots sit on some of the older plats in the area. Local knowledge matters here more than on a greenfield build. A fence line that ignores an old easement off Bedford-Euless Road will be a problem at resale, an insurance claim, or the next boundary conversation with a neighbor. We’d rather measure the setback before we quote than explain it after installation.
Why Rowan Construction Group Is Hurst’s Preferred Fence Installation Company

Under Clause 1 of The Haven Standard, the price is written before anyone starts. That means a flat written quote with a written scope and a written warranty, spelling out the wind-load rating of panels and gates, the footing depth in inches, and whether permit and survey costs are included. It’s not a range with an asterisk; it’s a number you can screenshot and compare against another bid. Across more than 4,000 projects since 2007, that discipline has kept jobs within a few percent of the agreed cost. It also means if a crew hits an unexpected root or a lot-line surprise, no change proceeds until you sign a change order. You’ll see exactly what changed and why before the next board is set.
Every visit includes a documented photo record as a standard deliverable. On a fence job that means grading, footing depth, post spacing, and the finished line compared against the plat, so you have evidence for an insurer or a future buyer. We also offer a Free Second Opinion on any written estimate: bring a competitor’s quote on a Hurst fence and we’ll review it line by line at no charge. Calls are answered by a live person 24/7.
Every Hurst neighborhood is different. The tract homes off Pipeline Road have tighter side yards and older plat restrictions than newer subdivisions further north, and the fence layouts reflect it. If you want the deeper background on how we approach fence work in this city, see our Fence Installation in Hurst page for the local scope and service details.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Hurst
Wood Fence Installation in Hurst
Cedar and pine privacy fences are still the standard along the narrow lots in the 76053 side of Hurst, and they’re what we install most often. Our installers set steel posts or concrete footings below the active clay zone so the line stays true as the soil expands and refills. A typical wood privacy fence in Hurst runs $4,200 – $11,000 depending on height, board grade, and gate count. Our Fence Installation team can walk a Hurst yard and quote the exact run in writing.

Vinyl Fence Installation in Hurst
Vinyl holds color through North Texas heat better than painted wood, and the panels rated for 110 mph wind load hold up in the straight-line gusts that roll through along SH-183. In Hurst‘s newer sections and the 76054 side, vinyl is often the better answer for a southern-exposure run. Vinyl fence installation in Hurst typically runs $3,500 – $9,000 for a full residential perimeter.

Chain Link Fence Installation in Hurst
Chain link is the practical choice for side-yard containment on the older 1960s – 1980s tract homes, especially where a dog run or driveway barrier is the real goal. Galvanized posts and heavy-gauge fabric give you the longest service life in this climate. We set posts deep enough to resist clay heave and tension the fabric so it doesn’t sag over a Texas summer.

Aluminum Fence Installation in Hurst
Aluminum is the common pick for front-yard decorative fencing in the neighborhoods near the SH-183/121 corridor, where setback restrictions limit what you can run. Powder-coated panels hold up against hail and sun, and they don’t rot. Aluminum fence installation in Hurst runs $4,000 – $10,000 for a standard perimeter.
Trusted Brands We Service in Hurst
Material selection matters more than the brand sticker on the panel, but the brands still tell you something. For fence systems, the meaningful spec is wind rating, post coating, and board thickness. For gate hardware and housing trim on any adjoining structure, we work regularly with James Hardie siding and trim, and we source cabinets and fixtures through KraftMaid and Wellborn when a fence project expands into a full exterior remodel. Rowan does not carry parts inventory on trucks; we source against the written quote and schedule delivery so the timeline stays accurate. No parts stock means no surprise substitutions and no “we’ll have to come back next week for the gate hardware.”
Common Fence Installation Problems We See in Hurst Homes
- Fence installed without a permit or survey. Many Hurst fences put up in the 1980s and 1990s were built before anyone checked the lot line against the plat. When the fence encroaches on an easement or setback, the result is a code violation or a neighbor boundary dispute, and either one can surface during a sale or an insurance claim.
- Panels rated below local wind-load requirements. Wood or vinyl panels rated under 100 mph fail at the posts and rails during the spring hail and straight-line wind events that hit the 183/121 corridor. The panel might survive; the posts usually don’t.
- Footings poured too shallow in expansive clay. Hurst sits on the same North Texas clay that moves every drought-and-refill cycle, and on older plats with disturbed fill the movement is worse. A footing that’s set above the active clay zone will heave and lean the fence within a few seasons, no matter how good the panel is.
- Gate sag from undersized hardware. A wide wood gate pulling on undersized hinges and a post that was never rated for the load. If the post isn’t deep enough or the hinge isn’t rated for the gate weight, the gate will drag within a year. Gates need the same spec treatment as the run.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Hurst, TX
Hurst sits in a specific spot in the Mid-Cities market, and pricing here reflects it: fully built-out lots, narrow side yards, and permit and survey steps most fence contractors don’t include. A typical full-perimeter residential fence installation in Hurst runs $3,500 – $9,000 for vinyl and $4,000 – $10,000 for aluminum, with wood privacy between those bands depending on height and material grade. What moves the number: run length and gate count, board or panel grade, footing depth required by the soil, and whether the permit and survey are rolled into the bid. Call (833) 570-6084 for the exact quote in writing, before anything is ordered. Estimates are free.
| Service | Typical Hurst Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Wood Privacy Fence | $4,200 – $11,000 |
| Fence Gate (per gate, installed) | $400 – $1,200 |
| Fence Repair (per section) | $200 – $800 |
We Also Serve Cities Near Hurst
Because Hurst sits in the center of the Mid-Cities, jobs in the surrounding towns are a short trip. We also serve Fence Installation work in Bedford, Richland Hills, North Richland Hills, and Colleyville. Same written price, same permit discipline, same wind-load documentation. If your property line touches one of these cities, ask the estimator which jurisdiction controls the permit.
Serving Hurst, TX – Our Local Coverage Area
We serve Hurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Hurst

Yes, most fence replacements in Hurst require a permit, and the inspection sign-off becomes documentary proof the fence was built to code. That proof matters at claim time: when a wind or hail event damages the fence, the insurer wants evidence the structure was permitted and built to the rated wind load. Without it, a claim can be denied or reduced. Because Hurst is built out and lots in the 1960s – 1980s plats off Pipeline Road and Bedford-Euless Road are narrow with older easement and setback restrictions, a survey confirming the fence sits inside the property line is usually part of the process. That step separates a compliant bid from a cheap one. Call (833) 570-6084 for a written quote that includes permit and survey scope.
A new fence in Hurst should meet a minimum 100 mph wind-load rating for panels, posts, and gates, and 110 mph is the safer target given the straight-line wind events that hit the 183/121 corridor. Vinyl systems from rated manufacturers carry the specification printed on the panel; certain aluminum systems are rated at or above 110 mph. Wood is not rated as a system the way vinyl and aluminum are, which is why post spec and footing depth carry more of the load on a wood fence. Call (833) 570-6084 and we’ll tell you in writing what rating the panels in your quote carry.
Narrow side yards and older plat restrictions limit what you can install and where. On a typical Hurst lot off Pipeline Road, there may be less than three feet between the house and the property line, which pushes the fence to the setback limit and rules out a wide-gate entry. Older easements may run through a portion of the side yard, which means the fence line has to clear the easement or the owner has to accept that the fence will need to be removed if the city ever needs access. The layout has to work with the plat, not against it. Call (833) 570-6084 and we’ll pull the plat and talk through options on your lot.
A compliant quote includes the permit and inspection, a survey confirming the fence is inside the property line, the wind-load rating of panels and gates, and the footing depth called for by the soil. It also spells out post spacing, hardware spec for gates, and waste removal. A cheap bid usually leaves out the permit, skips the survey, and uses generic panel that doesn’t declare a rating. On a $4,200 – $9,000 fence, that’s a $500 – $1,500 gap in scope, and the gap gets paid later, at inspection or at claim time. Call (833) 570-6084 for a written quote with every line itemized.
Hurst’s expansive clay moves through every drought-and-refill cycle, so fence footings have to be set below the active zone or they will heave and lean the fence within a few seasons. On the older plats with disturbed fill, the active zone runs deeper and footing depth has to account for it. The fix is concrete: footings poured to the depth the soil calls for, not the minimum a cheap quote assumes. That is also the most common reason a Hurst fence fails at the post and not the panel. Call (833) 570-6084 and we’ll tell you the footing depth the quote is built on.
Schedule Your Free Fence Estimate in Hurst
Hurst’s aging tract neighborhoods, tight lots, and spring wind events make fence work a documentation problem as much as an installation one. We write the price before anything is ordered, we pull the permit, we verify the setback against the plat, and we hand you a photo record at the end. That’s the 365-Day Done Right Promise: if it’s not done right, we make it right, backed by The Haven Standard. Call (833) 570-6084 to schedule your free estimate in Hurst, or ask for the Free Second Opinion on a competing bid. Either way, you’ll have a number in writing before you decide.
Written by the team at Rowan Construction Group.












