A Rowan company - serving Fort Worth, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower

Tub-to-Shower Conversion Cost in Fort Worth - Fixed Price, One Bathroom at a Time

Free in-home consult and a written, line-item quote before demo starts. We work one bathroom at a time so your house stays livable, and the signed price is the final price. Licensed, insured, permits handled.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fort Worth
🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Tub-to-Shower Conversion Cost in Fort Worth?

A tub-to-shower conversion in Fort Worth typically runs $3,500 to $10,000, with most homeowners landing somewhere around $5,200 to $7,400 for a standard alcove swap using a tiled pan and a mid-grade fixture set. The low end assumes you’re replacing a tub with a one-piece acrylic unit in an existing 60-inch alcove. The high end covers a custom tile job with a linear drain, a frameless glass panel and a bench, which is common in the older bungalows around Fairmount and Ryan Place where the original plumbing needs reworking too.

That’s the number. Everything below explains what moves it, what we actually write into a quote, and what to check before you sign one. Estimates are free, and under Clause 1 of the Haven Standard you get the price in writing before anyone picks up a tool. Call (833) 570-6084 when you’re ready for yours.

Key Takeaways

  • Typical Fort Worth range: $3,500 to $10,000 for a full tub-to-shower conversion.
  • Most common landing point: $5,200 to $7,400 for an existing alcove with a tiled pan.
  • What drives the number: waterproofing method, tile choice, glass, and whether the drain and valve have to move.
  • Written price before work starts, always. No change proceeds without a signed change order, which is why our projects finish within a few percent of the agreed cost.
  • Documentation included: background-checked, uniformed technicians and a photo record on every visit.
A tile setter installing wall tile in a shower

Tub-to-Shower Conversion Cost Breakdown (2026)

Here’s how a Fort Worth conversion breaks down line by line. We quote flat prices, not hourly, so every row below is the number we’d write on your estimate after we’ve seen the bathroom.

Line item Typical range What it covers
Tub removal and disposal $250 – $600 Cutting out and hauling the old tub, patching the alcove apron.
Rough plumbing and valve work $450 – $1,600 Relocating the drain to center the shower, swapping the mixer valve.
Waterproofing and backer board $700 – $2,100 Cement board, a bonded sheet or liquid-applied membrane, curb and pan.
Tile and setting materials $900 – $3,200 Wall and floor tile, thinset, grout, trim pieces. Porcelain vs. natural stone swings this hard.
Prefab acrylic or fiberglass pan and walls $800 – $2,600 The one-piece alternative to tile; faster to set, fewer seams.
Shower valve and trim $300 – $900 Kohler or Toto trim sets, pressure-balance or thermostatic.
Glass enclosure or curtain rod $400 – $2,200 Framed panel up to frameless 3/8-inch glass with a hinged door.
Grab bars, bench, niche $250 – $1,400 Accessibility and storage add-ons.
Drywall repair and paint $150 – $650 Patching the wall where the old tub surround met the floor.
Permit and inspection $100 – $350 Fort Worth permits when the drain or valve moves (see below).

All-in, that’s the $3,500 to $10,000 range. A straight acrylic swap in a standard alcove sits at the bottom. A tiled walk-in with a linear drain, frameless glass and a bench pushes toward the top. If you want the wider picture of what a whole bathroom costs in this market, our Fort Worth service area page lays out the adjacent trades.

One honest note on scope: if you’re also replacing the vanity or re-tiling the floor, that’s a bathroom remodel, not just a conversion. A full bathroom remodel in Fort Worth runs $9,000 to $28,000, and a small bathroom remodel runs $5,000 to $12,000. If the room needs that much work, we’ll tell you before you write a check rather than discover it mid-job.

What Affects Tub-to-Shower Conversion Pricing in Fort Worth

The range is wide because a handful of decisions carry most of the cost. In Fort Worth’s housing stock, these are the ones that come up most.

  • The waterproofing method. A bonded sheet membrane or a liquid-applied system behind the tile is what keeps the shower from failing in five years, and it’s the line most cheap bids skip. It’s the difference between a $3,800 job and a $6,000 job, and it’s a difference that matters when the north Texas clay soil shifts under a pier-and-beam floor.
  • Tub-and-tile vs. prefab. A one-piece acrylic unit is fast and forgiving. Tiled walls cost more in labor and materials but let you match the 1940s bungalow tile in Ryan Place or the transitional look in Ridglea. We name the tile and the setting materials in the quote so you can compare line for line.
  • Whether the drain and valve move. Converting a tub to a shower usually means relocating the drain to center the shower base and swapping the valve to a shower-only mixer. If the existing plumbing is copper in good shape, it’s straightforward. If it’s old galvanized, that’s a real cost.
  • Glass. A curtain rod costs nothing. A framed glass panel is a few hundred. A frameless 3/8-inch glass door is a genuine line item. We quote all three so you can see the jump.
  • Fort Worth permitting. A conversion that keeps the drain and valve in place often needs no permit; moving either one usually does. Fort Worth’s residential permit process runs through the city’s online portal, and inspections need to be scheduled in advance. We handle the paperwork and note it in the written scope.
  • Access and demolition. A second-floor bathroom in a 1920s house near TCU with no service elevator means carrying the old cast-iron tub down stairs. That labor is real, and it’s in the quote up front.
A new stained cedar privacy fence

How to Save on Tub-to-Shower Conversion

You don’t have to accept the middle of the range. These moves pull the number down without compromising the parts that keep water out of your walls.

  • Keep the drain where it is if you can. A centered drain isn’t always required. If the existing tub drain can stay put and the shower pan can be built around it, you save the plumbing relocation and often the permit.
  • Choose porcelain over natural stone. Porcelain tile has come a long way and reads convincingly. It’s a fraction of the material cost and lighter to install, which also trims labor.
  • Consider a quality prefab for a rental or a flip. A well-made acrylic unit from a real brand holds up and costs less than a tiled job. We’ll show you what’s available so you’re not guessing.
  • Skip the frameless glass unless it’s the point. A framed panel or even a good curtain rod keeps the water in. Frameless is beautiful and it’s a want, not a need.
  • Get a free second opinion. Bring a competitor’s written estimate and we’ll review it line by line at no charge. We’ll tell you where the number is thin, and you’ll know whether the quote is honest.

Every conversion we quote comes with a flat written price, a written scope and a written warranty before any work starts. Call (833) 570-6084 for a free estimate, and we’ll put the range on paper the same week.

What’s Actually Involved in a Tub-to-Shower Conversion?

A conversion removes the tub, adapts the alcove for a shower, installs new waterproofing, tile or a prefab surround, a shower valve and a drain, then finishes the walls and glass. It’s a plumbing-and-waterproofing project more than a cosmetic one, which is why the membrane and pan are where the money either goes or doesn’t.

Here’s the sequence we follow on every Fort Worth job, and the reason we document it:

  1. Measure and inspect. We check the substrate under the old tub, the condition of the drain and valve, and the wall framing. We photograph all of it.
  2. Written price and scope. Flat number, written scope, written warranty. You get it before we touch anything.
  3. Protect and demo. Floors and adjacent rooms covered. The old tub comes out and goes to the curb.
  4. Plumbing rough-in. Drain and valve set and inspected if a permit is in play.
  5. Waterproofing. Backer board, membrane, pan and curb built to manufacturer spec. This is the part that keeps the job from leaking into your ceiling six years later.
  6. Tile or prefab install.
  7. Trim and glass. Valve trim, shower head, glass. Final seal.
  8. Photo record and walkthrough. You get the documented record of what we found and what we did, every visit.

Because the crew is background-checked and uniformed, and because a live person answers the phone 24/7, you’re never waiting on a callback to know where the job stands. That’s the Haven Standard, and it’s checked on the way out, not promised.

Is It Cheaper to Repair the Tub or Convert It to a Shower?

It depends on the tub. A simple reglaze or a drain repair runs a few hundred dollars, while a full conversion runs $3,500 to $10,000. If the tub is sound and you use it, repair is the lower-cost call. If the tub is cracked, the drain is failing, or you simply never use it, the conversion is where the money should go, because you’re fixing a problem and improving the room in one job.

We’ll tell you which camp you’re in after we’ve looked, and the estimate is free. Call (833) 570-6084.

Can You Convert a Tub to a Shower With a Prefab Unit?

Yes, and it’s the lower-cost path. A quality one-piece or multi-piece acrylic unit with the existing drain in place can bring a Fort Worth conversion down toward the bottom of the $3,500 to $10,000 range. It’s faster, fewer seams, and easy to clean. We name the brand and the model in the written scope so you know exactly what’s going in, not just “a shower unit.”

Prefab isn’t right for every house. If the alcove is an odd size (common in the older homes west of downtown), a tiled custom pan may be the only fit that works. We’ll tell you which before you commit.

Does a Tub-to-Shower Conversion Add Value in Fort Worth?

A walk-in shower is one of the most requested features buyers ask for in the Fort Worth market, and it can help a home sell faster, though the dollar return varies by neighborhood and price point. The bigger, harder return is functional: a shower you’ll actually use every day in a bathroom you don’t avoid. Our team treats the finished product as the real measure, and we back it with the 365-Day Done Right Promise. If it isn’t done right, we make it right.

For a broader look at what neighboring projects cost, our bathroom remodeling guide covers the full scope, and if you’re comparing against home improvements across the house, the trades page lays out the rest.

How Long Does a Tub-to-Shower Conversion Take?

Most Fort Worth conversions take three to seven working days once the materials are on site, with a tiled job at the longer end and a prefab swap at the shorter. Add a week or so if a permit and inspection are required because the drain or valve is moving. The written scope includes the schedule, and if rain delays a delivery, we text you with the update rather than leaving you to wonder.

If you’re sourcing this against another quote, we’ll review theirs line by line at no charge. That’s the Free Second Opinion offer, and it holds on every job.

FAQs – Tub-to-Shower Conversion Cost in Fort Worth

How much does a tub-to-shower conversion cost in Fort Worth in 2026?

Most conversions in Fort Worth run $3,500 to $10,000, with a standard alcove swap landing around $5,200 to $7,400. The low end is a prefab acrylic unit with the existing drain; the high end is a custom tiled pan with a linear drain, bench and frameless glass. Call (833) 570-6084 for an exact written quote, free.

Is it cheaper to repair the tub or replace it with a shower?

Repair is cheaper if the tub is sound, often a few hundred dollars for a reglaze or drain fix versus $3,500 to $10,000 for a conversion. But if the tub is cracked or the drain is failing, the conversion is the better spend because it solves the problem and updates the room in one job. We’ll tell you which call makes sense after a free look.

Do I need a permit for a tub-to-shower conversion in Fort Worth?

Often yes, and here’s when. If the drain or valve has to move, that’s plumbing work that typically requires a Fort Worth permit and inspection, which adds roughly $100 to $350 to the job. If the existing drain and valve stay in place, a cosmetic conversion frequently doesn’t. We handle the paperwork and note the permit line in the written scope. Call (833) 570-6084 to talk it through.

Can you convert a tub to a shower in the same footprint?

Yes, and it keeps the cost down. A same-footprint conversion keeps the existing drain location, which usually avoids the plumbing relocation and much of the permit, bringing the job toward the lower half of the $3,500 to $10,000 range. Odd-size alcoves, common in older Fort Worth homes, may need a custom pan, which we’ll quote up front.

What’s included in the written quote?

A flat price, a written scope that names the tile, valve and fixture brands, and a written warranty. No work starts until you’ve seen the number, and no change proceeds until the change order is signed. That’s how a project finishes within a few percent of the agreed cost, and it’s why a customer can trust the number on the page. Call (833) 570-6084 for your free estimate.

What Should You Do Next?

Get the range on paper. Tell us about the bathroom (the alcove size, whether the drain stays, and whether you want tile or prefab) and we’ll write the estimate the same week. Our technicians have up to 19 years of experience, the crews are background-checked and uniformed, and every visit includes a photo record as a standard deliverable, not an add-on. The 365-Day Done Right Promise is printed on every page and backed by a terms page, not an asterisk.

Free estimates. Flat written price before work starts. Call (833) 570-6084 today.

Pricing reflects the Fort Worth market as of 2026. Rowan Construction Group Fort Worth offers free estimates – call (833) 570-6084.

Written by the team at Rowan Construction Group.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."

- Malcolm T.

"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."

- Emil R.

"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."

- Iona F.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New painted shaker cabinets with an organized deep drawerA remodeled kitchen with a waterfall island and wood cabinetsA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA single-story rear room addition with tall windows and a new patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Fort Worth

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fort Worth team

A local vetted partner works across Fort Worth and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Fort Worth? Licensed & insured · free written estimates
Call (833) 570-6084

Request a Free Estimate

Tell us what's going on in Fort Worth. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch