







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Fort Worth, TX
Replacing a vanity, retiling a shower floor, or swapping out a builder-grade faucet set is the fastest way to change how a Fort Worth bathroom looks and works, and most of these jobs run $1,400 to $9,500 depending on scope. A single vanity and fixture swap stays under $2,000. A full tile shower rebuild with new fixtures and a vanity lands closer to $8,000. We quote these jobs as flat written prices before any tile is cut or any old material is hauled out.
Rowan Construction Group Fort Worth handles vanities, tile, and fixtures as part of our Bathroom Remodeling trade. The work looks simple on paper and gets tricky in the details: the wall behind the old vanity, the drain height once the new tile is set, the shower pan slope that has to be right or water pools in the corner. Our technicians have up to 19 years of experience on exactly these details. Call (833) 570-6084 for a written price on your project.

Key Takeaways
- Vanity, tile, and fixture work in Fort Worth typically runs $1,400 to $9,500. The written quote is a flat price with a written scope, and it arrives before any work starts.
- We install KraftMaid and Wellborn vanities and set tile over a correctly prepared substrate, not over whatever was there before.
- Under Clause 1 of The Haven Standard, no work begins on a change until you sign the change order. That discipline keeps projects within a few percent of the agreed number.
- Every visit includes a documented photo record as a standard deliverable. You see what we found before it gets covered up.
- The 365-Day Done Right Promise: if it is not done right, we make it right.
When You Need Vanities, Tile & Fixtures
These jobs come up for reasons that are specific to the housing stock here. Plenty of Fort Worth homes built in the 1950s and 1960s in Ridglea and Wedgwood still have the original 4-inch ceramic tile and a pink or harvest gold vanity. Homes built fast during the 2015-to-2020 stretch in north Fort Worth and Alliance often arrive with builder-grade everything that fails inside a decade. Here’s what prompts the call:
- The vanity is water-damaged at the base. Press the toe kick. If it gives, the particleboard has absorbed years of slow leaks from the sink or the floor line. That damage is almost always wider than it looks from the front.
- Grout keeps cracking or the shower floor stays wet. In Fort Worth’s clay soils, slab movement and settling is common, and it telegraphs up into tile. Cracks that return after regrouting usually mean the substrate or the shower pan has a problem, not the grout.
- The tile is dated and the layout is chopped up. Original 4×4 wall tile with a decorative border and a showerhead at chest height is a common pattern in older Fort Worth homes. It’s livable but it caps resale appeal.
- Fixtures are failing at the cartridge or the finish. Dripping faucets, shower valves that won’t hold temperature, and chrome that has flaked to the brass underneath. Kohler and Toto fixtures in particular hold up well, but every cartridge eventually goes.
- You’re adding a second full bath or an ensuite. A home addition or ADU (accessory dwelling unit, a separate living structure on the same lot) always needs a complete vanity, tile, and fixture package from scratch.
- You want a curbless or walk-in shower. Aging-in-place and resale both favor a low-threshold shower with a linear drain. That’s a rebuild, not a refacing job, because the shower pan and slope have to be recreated.

Our Vanities, Tile & Fixtures Process
- Written scope and flat price first. Before we touch anything, we measure the room, inspect the existing substrate, and hand you a written price with a written scope. Not a range. A number. That’s Clause 1 of The Haven Standard and it applies to a $1,600 vanity swap the same as a full bathroom rebuild.
- Photo record of what’s underneath. We pull the old vanity and take photos of the wall, the floor, and the shutoff valves. That documented photo record is included on every visit, not sold as an upgrade. It’s how you know what the price is actually paying for.
- Substrate prep and waterproofing. For tile, this is the step that decides whether the job lasts. We install a cement backer board or foam tile backer over the walls, apply a waterproofing membrane (a liquid or sheet product that keeps water out of the wall assembly), and confirm the shower pan has the correct slope to the drain before the first tile goes down. Skipping this step is the most common reason a tile shower fails inside five years.
- Vanity install. We set the new vanity level and shimmed, aligning the drain and supply lines, and checking that the sink cutout lines up with the faucet rough-in. KraftMaid and Wellborn both hold up well in humid bathrooms because of how their boxes and finishes are built. We confirm the model, the drawer configuration, and the finish in writing before ordering.
- Tile setting and grout. We set tile with the proper notched trowel for the tile size, use spacers for consistent grout lines, and grout with a sealed grout or an epoxy option in wet zones. We clean the joints before grouting so the finish is uniform.
- Fixture install and final photo record. Faucets, shower valves, drains, towel bars, and the toilet go in last. We test for leaks, take a final set of photos, and hand you the written warranty. If anything is off, the 365-Day Done Right Promise covers it.
Vanities, Tile & Fixtures Pricing in Fort Worth
These are honest ranges for Fort Worth. The exact number depends on the vanity size, the tile you pick, whether the substrate needs repair, and whether the layout is changing. The quote you get is a flat written price, so if we find something unexpected under the old tile, we show you the photo and hand you a change order to sign before any work continues.
| Scope | Typical price range | What’s included |
|---|---|---|
| Single vanity swap (no tile) | $1,400 – $2,800 | Remove old vanity, install new cabinet and top, set faucet and drain, reconnect |
| Vanity + fixture upgrade (faucet, showerhead, towel bars) | $2,200 – $3,800 | Vanity plus Kohler or Toto fixtures, new valve trim, all connections tested |
| Tile floor (50 sq ft bathroom) | $1,800 – $3,600 | Substrate prep, waterproofing where needed, tile set, grout, baseboard |
| Shower tile rebuild (walls + pan) | $3,500 – $7,500 | Demo, new pan and slope, membrane, wall tile, grout, drain |
| Full bathroom tile + vanity + fixture package | $6,800 – $9,500+ | New vanity, floor tile, shower rebuild, all fixtures, final photo record |
What moves the price up: large-format tile (12×24 or larger) needs a flatter substrate and more precise setting. Natural stone costs more than porcelain on both the material and the setting side. A tile layout that changes the fixture positions means plumbing rough-in work. A vanity in a non-standard width means a custom cabinet instead of a stock KraftMaid or Wellborn unit.
What keeps the price down: keeping the plumbing where it is, choosing porcelain tile over natural stone, using a stock vanity size, and confirming your tile and fixtures before we start so nothing gets reordered. We get honest numbers because we source across more than fifty vetted material brands. That means we can tell you which tile or which vanity gives you the same look for less, instead of quoting the highest-margin option.
Before you accept any quote, we’ll review a competitor’s written estimate line by line at no charge through our Free Second Opinion offer. Bring it in. We’ll tell you what’s missing from it and what’s padded.
FAQs – Vanities, Tile & Fixtures
How much does a tile shower rebuild cost in Fort Worth?
A tile shower rebuild in Fort Worth typically runs $3,500 to $7,500 for a standard 3×5 shower, including demo, a new shower pan with the correct slope, waterproofing membrane, wall tile, and grout. Custom sizes, large-format tile, and natural stone push that toward the higher end. Call (833) 570-6084 for a written price on your specific shower; the estimate is free.
Can you replace just the vanity without retiling the floor?
Yes, in most cases. A single vanity swap with no tile work typically runs $1,400 to $2,800, and we can usually work around an existing tile floor if the vanity footprint stays roughly the same. If the new vanity is wider or set in a different spot, the tile underneath will need patching or replacement, and we’ll tell you that before you commit. Call (833) 570-6084 and we’ll walk through it.
How long does a vanity, tile, and fixture project take?
A single vanity swap is usually one day. A tile floor takes two to four days including cure time. A full shower rebuild with tile runs five to eight working days because of demo, waterproofing, setting, and grout cure. We give you a written schedule with the written price, so you know the timeline before we start. Call (833) 570-6084 to get the schedule for your job.
What tile and fixture brands do you install?
We install KraftMaid and Wellborn vanities and source fixtures from Kohler and Toto, among others. For countertops, Cambria and Caesarstone are both options. The exact spec goes in writing on the quote so there’s no surprise about the model or finish. Call (833) 570-6084 to talk through which brands fit your budget.
Related Services
Why Homeowners Call Rowan for Vanity, Tile & Fixture Work
Rowan Construction Group operates under The Haven Standard, which is a set of written rules, not a slogan. Clause 1 puts the price in writing before any work starts. Every project gets a written scope and a written warranty. No change proceeds without a signed change order, and that’s the discipline that has kept our projects within a few percent of the agreed cost across more than 4,000 jobs since 2007.
Crews are background-checked and uniformed. A live person answers calls 24/7, including on weekends when a shower valve decides to fail. Every visit includes a documented photo record. If something isn’t done right within the first year, the 365-Day Done Right Promise means we come back and make it right. That’s backed by a written terms page, not an asterisk.
Tile, vanities, and fixtures are one sub-service of the larger bathroom work we do. For a bigger project, our team walks you through the full scope on the bathroom remodeling Fort Worth side of our business, which covers everything from layout changes to plumbing rough-in.
If your bathroom needs a vanity, tile, or fixture update, call (833) 570-6084 for a free estimate. We’ll give you a written price, a written scope, and a photo record before we leave the first visit.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth.


