







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Fort Worth Homeowners
A failed seal on a double-pane window or a door that no longer latches is one of the fastest ways to lose money in a Fort Worth house. Between the July heat load pushing through old aluminum frames and the spring hail that batters north-facing glass from Saginaw to Wedgwood, windows and doors take more punishment here than almost any other envelope component. Our technicians have up to 19 years of experience, and every project starts with a flat written price and a written scope before anyone touches a frame. Under Clause 1 of The Haven Standard, the number is on paper first. Call (833) 570-6084 and a live person answers around the clock to book your free estimate.
What Our Windows & Doors Service Includes

Window Installation
Window installation means opening or reframing the rough opening to fit a new unit, flashing it correctly, and sealing it against water intrusion in a way that satisfies Fort Worth’s adopted building code. You need full-frame installation when the existing frame is rotted or the wall has been re-sided, and insert (pocket) installation when the old frame is sound and you want the shorter job. We measure every opening ourselves, specify the glass package in writing, and pull the permits so the work passes inspection. That is the difference between a window that survives a 60 mph spring gust and one that leaks by the second season.
Door Installation
Door installation covers the whole assembly: rough opening, threshold, jamb, hinges, and the weather seal that keeps conditioned air inside. A front entry in a 1950s Wedgmont or Ridglea house often sits out of plumb after decades of clay-soil movement, so we check the opening with a level and a laser before we order anything. We install exterior entries, interior doors, French doors, and security-rated units, and we specify the jamb material and hardware in the written scope so there are no surprises on trim day.
Window Replacement
Window replacement is the tear-out of failing units and the install of new ones without altering the opening size. You need it when the glass seal has failed and fog has collected between the panes, when the sill has soft spots from water sitting on it, or when a single-pane original is radiating heat onto your sofa in August. We haul off the old units, inspect the rough opening for rot, and photograph what we find so you have a record before the new sash goes in.
Impact Windows & Doors
Impact windows and doors use laminated glass and a reinforced frame to resist windborne debris instead of relying on shutters you have to remember to hang. Fort Worth sits well inland, so this is less about hurricane rating and more about hail and wind damage from the spring storm track that runs up through Tarrant County. We specify the glass make-up and frame rating in the written scope and install to the manufacturer’s anchoring requirements, then document the installation with photos.
Energy-Efficient Windows
Energy-efficient windows pair Low-E coatings, argon or krypton fill, and a thermally broken frame to cut solar heat gain on west- and south-facing walls. Fort Worth’s long cooling season makes west-facing glass the most expensive square footage in the house, and a Low-E package with a solar heat gain coefficient around 0.25 makes a measurable difference on a July electric bill. We put the glass specs and U-factor in the quote, not on a brochure you never see again. Haltom City and Richland Hills homeowners with 1970s aluminum units see the biggest change.
Sliding & Patio Doors
Sliding and patio doors are the big glazed panels that open a living room to a patio, and they fail predictably: the rollers seize, the track fills with grit, and the glass seals fog. We replace the full unit when the frame has warped, and we rebuild the roller and track hardware when the frame is still true and the glass is clear. We also install impact-rated sliders where the opening faces the storm side of the house. Every replacement ships with the manufacturer’s written warranty, and our own 365-Day Done Right Promise sits on top of it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with James Hardie fiber-cement trim and siding around window and door openings because it holds paint far longer than wood in North Texas sun and won’t rot at the sill end-grain the way finger-jointed pine does. We service those openings and know where the caulk joint fails first, usually at the head trim where water sheets off the roof above. For interior trim packages and cabinet-grade millwork around a doorway in a KraftMaid kitchen, we match the profile so a new door doesn’t look bolted onto the room.
Brand matters most at the point of failure, so we bring that knowledge to every call: a James Hardie penetration needs the right flashing tape, a fiberglass entry needs the jamb shimmed correctly, and a wood-framed slider needs the weep holes clear or the track floods. We’re not a dealer for any window line and we don’t claim to be. We’re the crew that installs, inspects, and stands behind the work. Whether you have a premium fiberglass unit or a builder-grade vinyl window from the original build, we can help.
Signs You Need Windows & Doors Right Now
- Fog or moisture between the panes. That’s a failed seal that let the argon escape and moisture in, and the window has lost most of its insulating value. The glass or the whole unit has to go.
- A draft you can feel at the frame. If you feel moving air at the jamb on a windy day, the weather seal or the frame itself has failed. Fort Worth’s north wind finds every gap, and a drafty opening pulls your heating and cooling straight out of the house.
- Water stains or a soft sill after rain. Water traveling along the sill or under the trim means the flashing or seal is compromised, and it’s spreading into the wall. Get eyes on it before the rot reaches the framing.
- Sagging, racking, or a door that won’t latch. A hinge-side gap that changes with the seasons often means the jamb has moved. In a Fort Worth house on expansive clay, that can be the window or door telling you about a structural change.
- Condensation on the glass or a room you can’t cool. A hot room at the end of the house with clear glass usually has a west- or south-facing single-pane unit throwing heat. New low-E glass or a fresh unit cuts the load.
Our Windows & Doors Process – Step by Step
- 1
Book the free estimate. A live person answers at (833) 570-6084, and we set a window that works for you. No countdown games, no pressure calls.
- 2
Measure and document on site. We measure every opening, check for square and plumb with a level and laser, and photograph the existing frame, the sill, and any rot or water staining. That photo record is yours to keep.
- 3
Put the price and scope in writing. You get a flat written price, a written scope naming the exact units and glass specs, and a written warranty before any work starts. Under Clause 1 of The Haven Standard, nobody picks up a tool first.
- 4
Order, schedule, install. We order the units, pull the permits where the work requires them, and install to the manufacturer’s anchoring and flashing specs. Any change gets a signed change order before it’s done – the reason our projects finish within a few percent of the agreed cost.
- 5
Inspect and hand off the record. We check operation, seal, and finish, clean up, and leave you with the photo record of what we found and what we installed, plus the written warranty and the 365-Day Done Right Promise behind it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Fort Worth?

Window and door work in Fort Worth is priced by the opening, and the range is wide because material and complexity drive it. Full impact window installation for a typical house runs $8,000 – $25,000, while a standard window replacement across several openings runs $4,500 – $15,000. A single patio or sliding door replacement lands in the middle of those bands depending on size and glass package. The number moves with the size of the opening, the glass spec you choose, whether the frame is rotten and needs repair, and the number of units on the job.
Two things keep the price honest. First, we specify the brand, glass package, and frame type by name in the written quote, so you can compare line by line instead of a lump sum. Second, no change proceeds without a signed change order, which is how we’ve kept projects within a few percent of the agreed price. A free estimate includes an on-site measure, the photo record, a flat written price, and a written scope. We’ll also review any competitor’s written estimate with you at no charge and tell you where the numbers don’t line up. Call (833) 570-6084 for your free estimate.
Windows & Doors Near Fort Worth – Our Service Area
We serve Fort Worth and the surrounding Tarrant County communities, including Watauga, North Richland Hills, Forest Hill, Hurst, Kennedale, Keller, Bedford, Colleyville, and Arlington. Travel is a short drive from your street to ours, so scheduling in our Fort Worth service area moves quickly, and we cover nearby Haltom City and Richland Hills just as easily. Whether your window faces the storm side near Saginaw or the afternoon sun off Camp Bowie, we can help.
Serving Fort Worth, TX – Our Local Coverage Area
We serve Fort Worth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Fort Worth

It covers installation of new units, replacement of failed ones, and repair of the hardware and seals on existing windows and doors. In Fort Worth that means everything from a single fogged window to a full impact-rated package across a house. We handle the measure, the permit, the install, the flashing, and the warranty. Call (833) 570-6084 and we’ll tell you which path makes sense for your openings.
Most door replacements are a one-day install, and a whole-house window replacement usually runs a few days depending on the count and whether reframing is involved. Custom or impact units need lead time for fabrication before install begins. We give you a realistic schedule in writing with the quote. Call for an exact timeline once we’ve measured.
Standard window replacement in Fort Worth typically runs $4,500 – $15,000, and full impact window installation runs $8,000 – $25,000. The final figure depends on opening count, glass package, frame condition, and access. Call (833) 570-6084 for an exact quote – estimates are free, and you’ll get a flat written price before any work starts.
Yes. We install James Hardie fiber-cement trim around window and door openings because it resists rot and holds paint in North Texas sun. We also work with standard wood and composite trim profiles to match the house. Whether your openings feature James Hardie or any other material, we can help.
We treat a broken window or a door that won’t secure as an urgent call, and a live person answers at (833) 570-6084 around the clock. We’ll talk through securing the opening and get a crew scheduled as soon as we can. A written price and photo record come with every visit.
Every install carries the manufacturer’s written warranty plus our 365-Day Done Right Promise: if it isn’t done right, we make it right for a full year. The guarantee is printed on every page and backed by a written terms page, not an asterisk. We hand you the paperwork at the end of the job.
Clear the floor and wall space around each opening, take down curtains and blinds, and move furniture away from the work area. We handle the rest, including floor protection and cleanup. If you’re working through a larger project, we can coordinate with our bathroom remodeling or home additions and ADU crews so the schedule lines up. Call (833) 570-6084 to confirm the plan.
Schedule Your Windows & Doors Service in Fort Worth Today
If you’re comparing window and door quotes in Fort Worth, the fastest way to a real number is a free estimate. Call (833) 570-6084 and a live person answers around the clock. We deliver a flat written price, a written scope, and a photo record before any work starts. If you have a competitor’s written estimate, bring it – our second-opinion review is free. No obligation, no urgency games, just the number in writing.
Written by the team at Rowan Construction Group.












