







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Fort Worth, TX
Cabinet installation in Fort Worth runs $4,200 to $9,500 for a standard 10-by-10 kitchen in painted or stained wood, while refacing those same boxes with new doors, drawer fronts and veneer runs $2,400 to $6,100. Refacing keeps the existing cabinet boxes and changes the face; installation replaces the boxes themselves. We do both, and we put the number in writing before anyone opens a box. Call (833) 570-6084 and we’ll schedule a measurement.
Rowan Construction Group Fort Worth has delivered 4,000-plus projects since 2007 under The Haven Standard, the written system that governs every trade we run. Cabinet work sits inside our Kitchen Remodeling practice, and this page covers the cabinet-specific slice of it: measuring the room, choosing the line, and building the boxes in level. Our technicians have up to 19 years of experience, and they’re background-checked and uniformed before they ever knock on your door.
Why cabinets get their own page: a kitchen cabinet job fails or succeeds on the substrate behind the face frame and on whether the boxes are actually plumb when they get screwed to the wall. We check both before quoting, and we photograph what we find. That photo record is included on every visit, not an upgrade.

Key Takeaways
- Refacing in Fort Worth typically costs 40-60% less than full replacement because it reuses the existing boxes.
- We measure for out-of-square walls before quoting, because Fort Worth homes built between 2015 and 2025 in the near suburbs often have drywall bow that a stock cabinet won’t sit flush against.
- KraftMaid and Wellborn are two of the cabinet lines we quote most; Cambria and Caesarstone come in for the countertop that follows.
- Every price we give is a flat written price with a written scope and a written warranty.
When You Need Cabinet Installation & Refacing
Most cabinet calls fall into one of these buckets. If yours does, it’s worth a measurement visit.
- The doors are sound but the finish has failed. Fort Worth’s summer humidity swings between 30% and 80% across a single week, and that cycle opens seams on painted and lacquered doors year after year. If the boxes are solid and the hinges still hold, refacing saves the money you’d spend tearing out good plywood.
- The boxes are particleboard and swollen at the base. Water damage at the toe kick under a sink is the most common failure we see in Fort Worth kitchens built before the mid-2010s. Once particleboard swells, it does not come back, and the box has to go.
- The layout no longer fits how you cook. A wall of cabinets with no drawer bank, a corner that swallows a lazy Susan, a peninsula that blocks the work triangle. If the plan changes, the boxes change, and that’s installation, not refacing.
- You’re matching new cabinetry to an existing kitchen. Additions, ADU kitchens, and butler’s pantries all need the new boxes to match the ones already installed next door. That’s a finish-match problem, and it’s where a line like Wellborn’s stain library earns its keep.
- The hinge or drawer glide has failed on a box you’re keeping. Soft-close hinges and undermount glides wear out on a schedule. If the hardware is the only problem, new hardware and a fresh face is the honest answer, and we’ll tell you so.
- You’re selling or refinancing and need the kitchen to read correctly in photos. A refaced kitchen photographs well when the doors, drawer fronts, and toe kick all match, and the photo record we leave behind documents what was replaced for the next owner.

Our Cabinet Installation & Refacing Process
The process below is the one we run on every cabinet job in Fort Worth. It’s written out because you should know what happens before you sign anything.
- Measure, including the walls. We run a level across the back wall and check the corners for square. Fort Worth homes built in the last ten years sometimes have drywall bow of a quarter inch or more, which means a stock cabinet won’t sit flush without shimming, and a shimmed cabinet needs a scribe molding to hide the gap. We measure before we quote so the quote includes the trim.
- Choose the line and the finish. We quote KraftMaid and Wellborn as our primary cabinet lines, both with published door styles and finish catalogs. For refacing we match the veneer and door finish to the room’s existing trim so the new face reads as original. You’ll see the sample in daylight before you commit.
- Write the price. Under Clause 1 of the Haven Standard, the price is written before anyone starts. That means a flat price with a written scope: what’s being removed, what’s being installed, what’s staying, and what the warranty covers. No work proceeds on a change until the change order is signed, which is the discipline that keeps actual cost within a few percent of the agreed number.
- Protect the room and remove the old face or boxes. Floors get a hard barrier, counters get padded, and appliances get disconnected and moved to the center of the room. Old boxes come out intact where they can be donated or reused; the photo record documents the condition we found behind them.
- Install to level and plumb. Boxes go in shimmed, screwed to studs at the cabinet rail, and checked with a level on each face. Crown and filler go on last, scribed to the ceiling and the wall. Doors and drawer fronts get hung after the boxes are true, because a door hung on an out-of-true box will show a gap that never closes.
- Walk it, then photograph it. We walk the finished kitchen with you, open every door and drawer, and check soft-close function. The photo record of the finished job goes with the written warranty. The 365-Day Done Right Promise backs it: if it’s not done right, we make it right.
Cabinet Installation & Refacing Pricing in Fort Worth
Here’s the honest range. Every kitchen is different and the number we write reflects your actual room, but these are the ranges we work from in Fort Worth.
| Scope | Typical Fort Worth Range | What Drives Cost |
|---|---|---|
| Refacing, 10-by-10 kitchen (doors, drawer fronts, veneer) | $2,400 – $6,100 | Door style, finish, veneer vs. laminate, hardware upgrade |
| Full cabinet installation, 10-by-10 kitchen, stock line | $4,200 – $7,200 | Box material (plywood vs. particleboard), drawer bank count |
| Full cabinet installation, semi-custom (KraftMaid, Wellborn) | $6,800 – $9,500 | Door style, finish, glides and hinges, crown and filler |
| Island cabinet addition | $1,200 – $3,400 | Size, base cabinet style, toe kick, counter overhang |
| Pantry or butler’s pantry run | $2,100 – $5,600 | Linear feet, depth, door count, finish match to existing |
| Hardware replacement only (hinges, glides) | $400 – $1,100 | Count of hinges, glide type, soft-close upgrade |
What moves the number most: the door style and finish (a glazed, hand-rubbed finish costs meaningfully more than a flat painted door), the box material (plywood boxes last longer than particleboard and cost more), and the room’s geometry. A Fort Worth kitchen with a bay window or an angled corner needs fillers and scribe work that a plain rectangle doesn’t, and those get quoted, not discovered.
If you’ve already received a quote from another cabinet installer, bring it to us. Our Free Second Opinion on any written estimate means we’ll read it line by line with you, at no charge, before you commit. Estimates with Rowan are always free and always in writing.
Cabinet work usually pairs with countertops and backsplash, and you can see how we sequence the whole job on our Kitchen Remodeling in Fort Worth page. For a broader view of the trades we run, start at our home page and follow the links from there.
FAQs – Cabinet Installation & Refacing
Is it cheaper to repair or replace cabinets in Fort Worth?
Repair is cheaper when the boxes are sound and only hardware or a few doors have failed; refacing is cheaper than replacement at roughly 40-60% of the cost when the boxes are solid but the faces are dated. Replacement is the right answer when the boxes are swollen, out of square, or the layout is changing. We measure before we answer, so the recommendation is based on what we find. Call (833) 570-6084 for a free measurement – the quote is written and free.
How much does cabinet refacing cost in Fort Worth?
Refacing in Fort Worth runs $2,400 to $6,100 for a standard 10-by-10 kitchen, with door style, finish, and veneer type driving the spread. Laminate veneer sits at the low end; wood veneer and a hand-rubbed finish sit at the top. The written quote itemizes what’s being replaced and what’s being reused. Call (833) 570-6084 and we’ll put an exact number in writing for your kitchen.
How long does cabinet installation take in Fort Worth?
A 10-by-10 kitchen with stock or semi-custom cabinets typically takes three to five working days from demo to the final walk-through, assuming the cabinet line ships on schedule. Refacing a similar kitchen usually takes two to three days. Islands, pantries, and finish matches to an existing kitchen add time, and we build that into the written schedule before you sign.
Do you install KraftMaid and Wellborn cabinets in Fort Worth?
Yes. KraftMaid and Wellborn are the two cabinet lines we quote most often, and we’ll bring door and finish samples to the measurement visit so you can compare them in your own kitchen light. We also quote Cambria and Caesarstone countertops when the cabinet job runs into a counter replacement, and we don’t sell a line we can’t produce a written spec sheet for.
Can you work with a cabinet line I already purchased?
Yes, on a case-by-case basis. If you’ve already ordered boxes, we’ll inspect them at delivery for damage and freight issues, then install to level and plumb with the trim and crown the room needs. The written price covers installation and the finishing trades around it, and the photo record documents the condition of the delivered boxes on arrival. Call (833) 570-6084 to talk through what you’ve ordered.
Get a Written Cabinet Price for Your Fort Worth Kitchen
Cabinet work is a measurement problem before it’s a finish problem, and the measurement is free. Call Rowan Construction Group Fort Worth at (833) 570-6084 and we’ll schedule a visit, measure the walls, show you the KraftMaid and Wellborn finish samples, and leave with a written price and a written scope in your hands. Calls are answered by a live person 24/7, and the photo record of every visit goes with the written warranty. If it isn’t done right, the 365-Day Done Right Promise makes it right.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth.


