







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Fort Worth, TX
A tub-to-shower conversion in Fort Worth typically runs $6,200 to $14,500 and takes one to two weeks from demolition to final walkthrough. We remove the existing tub, rework the drain and waterproofing, and install a walk-in shower with a flat written price agreed before any work starts. Most of the homes where we do this are in the 32-to-50-buyer range that bought between 2015 and 2025, and often the original tub is a builder-grade alcove unit that measures 60 inches by 30 inches and has been leaking into the subfloor for years.
Rowan Construction Group Fort Worth handles tub-to-shower conversion as a defined scope under our larger Bathroom Remodeling work. Under Clause 1 of The Haven Standard, you get a written price before anyone starts. No work proceeds on a change until the change order is signed. Call (833) 570-6084 and a live person answers, day or night.

Key Takeaways
- Typical Fort Worth tub-to-shower conversion: $6,200 to $14,500 installed, with the price written before work starts.
- Most conversions take 7 to 12 working days, and the waterproofing step takes longer than the tile does.
- Every visit includes a documented photo record of what we found and what we did, at no extra charge.
- Our technicians have up to 19 years of experience. Every crew member is background-checked and uniformed.
- Bring a competitor’s written estimate and we’ll review it line by line at no charge.
When You Need Tub-to-Shower Conversion
- The tub has been leaking at the overflow or drain. In older Fort Worth neighborhoods like Ryan Place and Mistletoe Heights, we regularly find a tub pan that’s been seeping into the joists for years. The visible damage is usually the tip; the subfloor rot underneath is the real story.
- Someone in the house can’t safely step over a 16-inch tub wall. A flat, low-threshold shower with a built-in bench or a fold-down seat removes the hazard. Fort Worth homes with a single bathroom get the most value from this because there’s no second bath to fall back on.
- The tub is the only thing you use and it never gets used. A lot of newer homes in Westover Hills and the near west side have a tub in the hall bath that sits dry while everyone showers. Converting frees 30 to 60 square feet of floor.
- You’re planning to sell within a few years. Buyers in TCU-adjacent and Fairmount listings consistently pass over a dated tub-and-surround combo. A clean tile shower with a proper waterproofing membrane reads as updated in a way a reglazed tub does not.
- The surround is cracked, mildewed, or out of date. A plastic or fiberglass surround that’s chipped at the seams lets water behind it. Once the substrate is wet, replacement is the honest answer, not regrouting.
- The bathroom is small and the tub eats most of it. Many of the bungalows in Northside and the older pockets of Arlington Heights fit a corner shower, a vanity, and a toilet into a footprint that once held a tub and almost nothing else.

Our Tub-to-Shower Conversion Process
- Written scope and flat price. We measure the alcove, look at the drain location, check the wall condition, and hand you a written scope with a flat price. Clause 1 of the Haven Standard means the price is in writing before any tool comes out of the truck.
- Protection and demolition. Floors and adjacent rooms get floor protection and plastic sheeting. The tub and surround come out, and we inspect the framing and subfloor. This is where a documented photo record first appears in your file: what the joists and stud bays looked like once the old unit was gone.
- Rough-in and waterproofing. The drain gets moved or replaced, the valve gets accessed or replaced, and the walls get a waterproofing membrane. This is the part that separates a shower that lasts 20 years from one that leaks in three. We use a bonded sheet or liquid-applied membrane over a cement backer, and we document it before tile goes up.
- Tile, glass, and trim. We install the tile you chose, set a curb or a curbless pan, and fit the glass. Frameless glass and a tiled niche are the two upgrades we get asked about most in Fort Worth.
- Change order discipline. If we open a wall and find rot, or you decide mid-project to add a bench, the change gets priced and signed before we do the work. That’s the discipline that keeps projects within a few percent of the agreed number.
- Walkthrough and 365-Day Done Right Promise. We test the drain, check slope and caulk lines, and walk you through the finished work with the photo record in hand. If something isn’t right in the first year, the 365-Day Done Right Promise says we make it right.
Tub-to-Shower Conversion Pricing in Fort Worth
Fort Worth tub-to-shower conversions generally run $6,200 to $14,500, and the honest way to read that range is line by line. The framing and waterproofing are where most of the variance lives, and in older city neighborhoods that means money in the walls, not the tile. You get a flat written price before work starts, and no-hassle upfront pricing is a standing offer, not a special.
| Line Item | Typical Range | Notes |
|---|---|---|
| Demolition and haul-off | $450 – $900 | Includes removing the tub, surround, and old substrate |
| Drain relocation and rough-in | $700 – $1,600 | Higher when the drain moves across the alcove |
| Waterproofing membrane and backer | $1,100 – $2,200 | Bonded sheet or liquid-applied over cement backer |
| Tile and setting materials | $1,800 – $4,500 | Porcelain at the low end, large-format or stone at the top |
| Shower valve, trim, and fixtures | $600 – $1,800 | Kohler and Toto fixtures common at the mid and upper end |
| Glass and door | $900 – $2,800 | Frameless glass sits at the top of the range |
| Labor and project management | $1,600 – $3,000 | Includes photo record and site protection |
What affects the cost: subfloor and framing repair, whether the drain moves, tile size and material, frameless versus framed glass, and whether the existing valve needs replacement. Older Fort Worth homes often need a new subfloor panel because of past tub leakage, and that’s a real number, not a gut feeling.
If you’re also updating the vanity or floor while the shower is open, we’ll quote the whole room. See our Bathroom Remodeling in Fort Worth page for the full-scope version. Not sure what’s behind the tub? We’ll find out before we quote.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Fort Worth?
A tub-to-shower conversion in Fort Worth typically costs $6,200 to $14,500 installed, with most projects landing in the $8,500 to $11,000 range. The price includes demolition, drain work, waterproofing, tile, fixtures, glass, and labor. Call (833) 570-6084 for an exact quote – estimates are free and the price comes in writing.
Can you convert a tub to a shower in the same alcove without moving walls?
Yes, in the majority of Fort Worth bathrooms the tub alcove is 60 inches by 30 to 32 inches, and a walk-in shower fits that footprint without moving walls. We often add a niche, a bench, and a setback or curbless entry within that space. If the alcove is oversized or the drain has to relocate across the room, we price that as a separate line item so the number stays honest.
How long does a tub-to-shower conversion take?
Most conversions take 7 to 12 working days from demolition to final walkthrough, and the waterproofing and cure time accounts for the biggest chunk of that. Tile setting and grout drying add a few days you can’t rush. We give you a date range in writing before the crew starts, and you get a text confirmation the day before each visit.
Is it cheaper to repair the tub or convert to a shower?
Repair is cheaper if the issue is limited to a chipped surface or a single failed caulk line. If the surround is cracked, the substrate is wet, or you’re not using the tub anyway, conversion is the better spend. A reglazed tub can run $500 to $900 and still leaves you with a tub. Call (833) 570-6084 and we’ll tell you which side of that line you’re on, based on what we see in photographs and on site.
Do I need a permit for a tub-to-shower conversion in Fort Worth?
In most cases, yes, a plumbing or building permit is required when the drain or valve is altered. The City of Fort Worth Development Services department handles residential permit review and inspection. We list the permit on the written scope so it isn’t a surprise line item.
What tile and fixtures do you install?
We source across more than fifty vetted brands, and for showers that usually means porcelain and ceramic tile, Kohler and Toto fixtures, and glass from established fabricators. We’ll bring samples at your written-price visit so you choose from what’s actually available, not from a catalog sheet that adds two weeks and 20 percent to the job. Sourcing depth is what makes the price we wrote the price you pay.
Why Homeowners Choose Rowan Construction Group Fort Worth
We’re a construction contractor, not a handyman service. Seven trades under one standard, 4,000-plus projects delivered, and a written price on every one before work started. The 365-Day Done Right Promise is printed on every page and backed by a terms page, not an asterisk. We answer calls with a live person 24/7, our license number is printed on the page, and every crew arrives background-checked and uniformed.
You also get a free second opinion on any written estimate. Bring a competitor’s quote and we’ll review it line by line at no charge. That’s the same discipline a careful contractor brings to a project: measure twice, say it once, show your work.
Ready to start? Call (833) 570-6084 for a free estimate and a written price before any work starts. A live person answers 24/7, and we’ll confirm your visit by text.
Written by the team at Rowan Construction Group Fort Worth, serving Fort Worth.


